Keezer sizing question.

[marjen]

I am looking at a freezer, Amana 7.0 chest from HD and trying to figure out if it will meet my needs. Looking for something that will hold 3-4 corny kegs and also preferably a 5-10# CO2 tank.

The dimensions are 22(d)x32.5(h)x38.5(w).

I did a search on the model number and nothing came up. Thanks.

Model #AQC0701DRW

Unit: http://www.homedepot.com/p/Amana-7-0-cu-ft-Chest-Freezer-in-White-AQC0701DRW/205046744

 

[porterpounder]

Cut out some 9" circles or, trace a keg, and cut it out 3-4 times. Do the same for your tank. Bring the circles to HD and lay them out in the display to see if they'll fit. You can always adjust the height of the keezer w/a collar, but not the length and width.

 

[marjen]

So I went ahead and order the unit, it should meet my needs just fine. Lots to figure out. I have some questions.

1. I need temperature control land looking for something easy, pnp. Is the Inkbird Itc-308 a good choice?
2. For the kegs are used corny kegs the best way to go? My local shop only carries New italian made corny kegs and they run a bit more about $115 each wondering if its worth it. I buy a ton of stuff online but wondering if I should just bite the bullet on the keg setup and go local so I have some good support if I ever need it.