briantompo
Member
Hi All,
I'm unloading everything I've accumulated over 5 years of brewing. I'm in central Florida, just south of Daytona Beach on the East Coast. Everything is spotless and ready to put into immediate use. Both gas bottles need filling. Here's a link to the craigslist add I just posted plus the text description:
https://daytona.craigslist.org/hsh/d/new-smyrna-beach-keezer-kegs-homebrew/6879789714.html
5 faucet keezer plus everything you need to brew, keg and/or bottle your own beer. Keezer holds 7 corny kegs plus the 20lb bottle & was in operation until 4-20-19. Requires a space 51" wide x 29" deep. It's 42" tall on castering dolly, 36" tall without dolly. I've cleaned & sanitized everything so it's ready for your beer.
Keezer was built on 10.6 cuft GE chest freezer & features foam insulated collar with 5 Intertap faucets. Faucets, shanks & tail pieces are all stainless (not chrome plated) and were $75/ ea. This package includes everything you see plus a whole bunch of stuff you don't. There's about $3k worth of stuff included. It's every, single brewing item I've accumulated during 5 yrs of brewing:
5 tap insulated keezer.
Inkbird ITC308 temp controller.
20lb CO2 cylinder (hydro tested Jan'17) with dual Taprite regulator.
5 lb CO2 cylinder (hydro tested Nov'15) with Cornelius regulator.
6-way gas manifold w/individual shut-off valves.
7 ball lock corny kegs w/ new poppets & seals. All are immaculate inside & require zero cleaning.
Gas (gray) and Liquid (black) ball lock quick disconnects plus stainless swivel nuts.
two Clear Beer Draught System floating keg pickups both w/ hop screens.
Sanke fermentor (7.75gals) I converted to ball lock. I've had it to 50 psi. Great for spunding & natural carbonation.
11 gal Tallboy kettle w/ 3-pc stainless ball valve, stainless false bottom & two stainless lids.
10 gal kettle w/2 welded fittings + 1 weldless fitting. I used this as a low-Oxygen, recirculating mash tun (RiMs) & as a whirlpool vessel.
Camlock sight glass from BrewHardware in NJ. All the stainless bits are from Bobby...
Assorted 1/2" stainless camlock male & female ends, some on 1/2' ID silicon tube.
Mark II wort pump w/ metal pump housing.
300 micron stainless screen from Utah Biodiesel.
Thermoworks 8649 pH meter + pH 4.0 and pH 7.0 calibration solutions, potassium chloride storage solution.
digital TDS meter.
Refractometer.
two spunding valves w/ 30psi gauges.
12" long thermometer.
2L Erlenmeyer flask.
1L Erlenmeyer flask.
Stir plate w/ stir bar & magnet.
ball lock Carbonator cap (allows you to pressurize any soda bottle)
two 3-gal Better Bottle fermentors
6-gal clear PET fermentor
Corona grain mill in homer bucket ala: Ugly Junk Corona mill.
50' copper immersion chiller (two, concentric 25' coils that can be used individually)
300 gph pond pump for running ice water through chiller.
brewing minerals for adjusting water profile, including calcium chloride, gypsum, chalk, Epsom salts, slaked lime, canning salt, Brewtan B, ascorbic acid, lactic acid. Extras are vacuum bagged.
two bottle cap crimping tools plus caps. Plus a bunch of cleaned, sanitized & dried bottles.
Vinator bottle washer.
racking cane & autosiphon.
Wilser BIAB custom nylon brewing bag for the TallBoy kettle plus assorted hop socks.
large assortment of airlocks and stoppers all cleaned & stored dry.
Anything else I find...you get everything. Everything was cleaned, sanitized, dried and stored dry.
There is no mold or mildew on anything.
$1200 for everything. For reference, keezer cost me over $1100 to build.
I prefer text over email but will respond to either. I'm not interested in splitting everything up & making 20 trips to UPS. I hope you understand.
Thanks, Brian. (386) eight-five-two 7132.
I'm unloading everything I've accumulated over 5 years of brewing. I'm in central Florida, just south of Daytona Beach on the East Coast. Everything is spotless and ready to put into immediate use. Both gas bottles need filling. Here's a link to the craigslist add I just posted plus the text description:
https://daytona.craigslist.org/hsh/d/new-smyrna-beach-keezer-kegs-homebrew/6879789714.html
5 faucet keezer plus everything you need to brew, keg and/or bottle your own beer. Keezer holds 7 corny kegs plus the 20lb bottle & was in operation until 4-20-19. Requires a space 51" wide x 29" deep. It's 42" tall on castering dolly, 36" tall without dolly. I've cleaned & sanitized everything so it's ready for your beer.
Keezer was built on 10.6 cuft GE chest freezer & features foam insulated collar with 5 Intertap faucets. Faucets, shanks & tail pieces are all stainless (not chrome plated) and were $75/ ea. This package includes everything you see plus a whole bunch of stuff you don't. There's about $3k worth of stuff included. It's every, single brewing item I've accumulated during 5 yrs of brewing:
5 tap insulated keezer.
Inkbird ITC308 temp controller.
20lb CO2 cylinder (hydro tested Jan'17) with dual Taprite regulator.
5 lb CO2 cylinder (hydro tested Nov'15) with Cornelius regulator.
6-way gas manifold w/individual shut-off valves.
7 ball lock corny kegs w/ new poppets & seals. All are immaculate inside & require zero cleaning.
Gas (gray) and Liquid (black) ball lock quick disconnects plus stainless swivel nuts.
two Clear Beer Draught System floating keg pickups both w/ hop screens.
Sanke fermentor (7.75gals) I converted to ball lock. I've had it to 50 psi. Great for spunding & natural carbonation.
11 gal Tallboy kettle w/ 3-pc stainless ball valve, stainless false bottom & two stainless lids.
10 gal kettle w/2 welded fittings + 1 weldless fitting. I used this as a low-Oxygen, recirculating mash tun (RiMs) & as a whirlpool vessel.
Camlock sight glass from BrewHardware in NJ. All the stainless bits are from Bobby...
Assorted 1/2" stainless camlock male & female ends, some on 1/2' ID silicon tube.
Mark II wort pump w/ metal pump housing.
300 micron stainless screen from Utah Biodiesel.
Thermoworks 8649 pH meter + pH 4.0 and pH 7.0 calibration solutions, potassium chloride storage solution.
digital TDS meter.
Refractometer.
two spunding valves w/ 30psi gauges.
12" long thermometer.
2L Erlenmeyer flask.
1L Erlenmeyer flask.
Stir plate w/ stir bar & magnet.
ball lock Carbonator cap (allows you to pressurize any soda bottle)
two 3-gal Better Bottle fermentors
6-gal clear PET fermentor
Corona grain mill in homer bucket ala: Ugly Junk Corona mill.
50' copper immersion chiller (two, concentric 25' coils that can be used individually)
300 gph pond pump for running ice water through chiller.
brewing minerals for adjusting water profile, including calcium chloride, gypsum, chalk, Epsom salts, slaked lime, canning salt, Brewtan B, ascorbic acid, lactic acid. Extras are vacuum bagged.
two bottle cap crimping tools plus caps. Plus a bunch of cleaned, sanitized & dried bottles.
Vinator bottle washer.
racking cane & autosiphon.
Wilser BIAB custom nylon brewing bag for the TallBoy kettle plus assorted hop socks.
large assortment of airlocks and stoppers all cleaned & stored dry.
Anything else I find...you get everything. Everything was cleaned, sanitized, dried and stored dry.
There is no mold or mildew on anything.
$1200 for everything. For reference, keezer cost me over $1100 to build.
I prefer text over email but will respond to either. I'm not interested in splitting everything up & making 20 trips to UPS. I hope you understand.
Thanks, Brian. (386) eight-five-two 7132.
