iSpindel Calibration (Pure Water)

[tonny]

Hi,
Anyone else having nightmares callibrating an ispindel?
I managed to get 25 degree angle in clear water. took it out to charged, checked again .... 32 degrees
Trimmed it again, got at 26 degrees. took it out to charged, checked again .... floating at 15 degrees

anyone whogot it callibrated an it stayed in balance over time? (if so, HOW did you manage that ?? )

 

[ZeSlammy]

took it out of ? Just the water right ? You're not actually taking the PCB out of the tube ?
Is it snug in the tube like not moving at all (not even rotating) ?

 

[tonny]

Yes, took out the pcb to fasten the weight. It can move slightly up and down (not by itself), not sideways

 

[ZeSlammy]

Do not take it our. Ever. Once you got a good angle, it stays in. Forever.
If it can move up and down, try gluing it or printing a 3D ring holder thingie

 

[tonny]

Do not take it our. Ever. Once you got a good angle, it stays in. Forever.

Good advise. Opened it to re-charge. Real carefully not moving it, and indeed it was 'stable'

Will now trim and fixate it. Thnx!