storunner13
Well-Known Member
I have lots of lightly used and leftover electric brewery controller components from a previous build/rebuild and some that never made it into the final iteration. Please take a look! I can offer discounts on buying multiple sets. All items were used for <10 brews, or installed but unused. Prices listed are SHIPPED to CONUS (OBO).
(If you're interested in the medium-sized enclosure below, I have most of the items that can easily be installed in it without cutting new holes!)
ALL PHOTOS HERE
Large Heatsink. 11"x 5.375". Tapped for SIX SSRs as well as for installation on the enclosure. $30. Currently installed on 16x12x6" NEMA 1 enclosure.
Three Panasonic ADP51B61 6kpa pressure sensors (Like BrunDog's pressure sensors). $40 total. (I also have stainless mounting hardware/tubing and some capacitors etc to include for free).
Hubbel CS8275 50A 250v Twist Lock Panel Mount Male receptacle $40
NEMA L14-30 Male Panel Mount Receptacle (free with any purchase).
2x Neutrik PowerCON 32A plugs and panel receptacles $30
4x PowerCON 20A plugs and panel receptacles (1 Neutrik, 3 generic, 1 blue (power in) panel receptacle) $10
5v DPST Relays: 4x 8CH ; 3x 4CH ; 1x 1CH $30 total
6x 4-20ma to 0-5v conversion modules $5
Dragino Yun Wi-Fi Shield $15
CZH-LABS 4CH 12A SSR Module DIN mounted $25
32A Changeover Switch (manual switch HLT/BK elements) $9
20x GX12 / 5P Avaiation Plugs and Panel mount sets $10
3x CRYDOM 40A SSRs $12
Phoenix Contacts UT10N (6ga / 50A) DIN Terminal Blocks (6x Terminals + 6x 2P Bridges) $5
18x generic UK10N DIN Terminal Blocks (plus end caps x5 and bridges) $10
50A Spa GFCI Panel -- comes with 50A NEMA 14-50R installed in a hole cut in the top. Comes with a metal cord grip. SOLD
Mains power lot: DIN Contactors (63A, 25A x2), Circuit Breakers (5A, 25A x2), DIN Wire Terminals (30A), DIN Rails, Keyed Switch, 3-way switch x2, E-Stop SOLD
DC Power Supplies: 24v/4A ; 12v/5A ; 5v/3A SOLD
Current/Amp Meter 100A 250v PZEM-061 SOLD
(If you're interested in the medium-sized enclosure below, I have most of the items that can easily be installed in it without cutting new holes!)
ALL PHOTOS HERE
Large Heatsink. 11"x 5.375". Tapped for SIX SSRs as well as for installation on the enclosure. $30. Currently installed on 16x12x6" NEMA 1 enclosure.

Three Panasonic ADP51B61 6kpa pressure sensors (Like BrunDog's pressure sensors). $40 total. (I also have stainless mounting hardware/tubing and some capacitors etc to include for free).
Hubbel CS8275 50A 250v Twist Lock Panel Mount Male receptacle $40
NEMA L14-30 Male Panel Mount Receptacle (free with any purchase).


2x Neutrik PowerCON 32A plugs and panel receptacles $30
4x PowerCON 20A plugs and panel receptacles (1 Neutrik, 3 generic, 1 blue (power in) panel receptacle) $10

5v DPST Relays: 4x 8CH ; 3x 4CH ; 1x 1CH $30 total
6x 4-20ma to 0-5v conversion modules $5
Dragino Yun Wi-Fi Shield $15



CZH-LABS 4CH 12A SSR Module DIN mounted $25
32A Changeover Switch (manual switch HLT/BK elements) $9


20x GX12 / 5P Avaiation Plugs and Panel mount sets $10
3x CRYDOM 40A SSRs $12


Phoenix Contacts UT10N (6ga / 50A) DIN Terminal Blocks (6x Terminals + 6x 2P Bridges) $5
18x generic UK10N DIN Terminal Blocks (plus end caps x5 and bridges) $10
50A Spa GFCI Panel -- comes with 50A NEMA 14-50R installed in a hole cut in the top. Comes with a metal cord grip. SOLD
Mains power lot: DIN Contactors (63A, 25A x2), Circuit Breakers (5A, 25A x2), DIN Wire Terminals (30A), DIN Rails, Keyed Switch, 3-way switch x2, E-Stop SOLD
DC Power Supplies: 24v/4A ; 12v/5A ; 5v/3A SOLD
Current/Amp Meter 100A 250v PZEM-061 SOLD
Last edited: