user 108580
Senior Member
- Joined
- Feb 9, 2012
- Messages
- 645
- Reaction score
- 47
So let's say I brew a 10 gallon recipe that calls for 25 lbs of grain. Using a water to grist ratio of 1.25 qts/lb I would use 7.8 gal in my mash. My sparge would be about 13 gal.
Now, let's say I brew a high gravity 5 gallon recipe using the same 25 lbs of grain. Obviously my mash would still be around 7.8 gallons, but how would my sparge change?
I recently ran into this problem and came out low on my efficiency.
Thanks for any advice.
Now, let's say I brew a high gravity 5 gallon recipe using the same 25 lbs of grain. Obviously my mash would still be around 7.8 gallons, but how would my sparge change?
I recently ran into this problem and came out low on my efficiency.
Thanks for any advice.