Selling a half barrel brewery setup for a friend. All of the components were sourced to build Kals Electric Brewery. Building Your Brewery.
The only thing left to do is drill two holes for the heating elements, and two holes for the hermes coil.
Components include:
1-Electric Brewery 50 amp Control Panel (currently sold out on Kals site)
2-4500w wave style immersion heating elements.
3-Color Coded Probes for HLT, Boil Kettle and Mash Tun.
1-Stainless Steel Hermes Coil.
3-16 Gallon Bayou Classic Kettles with Embossed Graduated Marking inside, two false bottoms and two hop screens.
2-Ss Brewtech Half Barrel Chronical Fermeters both with FTSS temp control setups. (also currently sold out at SS)
2- Chugger SS Inline Pumps with Quick Connect hose fittings.
1- MoreBeer Counterflow Chiller assembly with Inline thermometer and Quick Connect hose fittings.
1-Ultimate Sparge Arm with Quick Connect hose fittings. One Kettle lid has been cut to accommodate this.
1-Blichmann Hellfire Floorstanding Burner.
8-1/2 inch ball valves with qc hose fitti gs.
4- 4' Silicone hoses with qc hose fittings
1-6'Silicone hose with qc hose fittings
1-4'silicone hose
1-6'silicone hose
1- 5' long Stainless Brew Table on Casters.
2-5 gallon pails, 1 threaded lid
2-7 gallon pails
1-bottle tree
1-SS Mash Paddle
1-Captain Crush Grain Mill
Alot of spare o rings, threaded parts for ball valves and weld less entry into kettles, etc.
This is a fantastic system to make quality, repeatable brews on. If you have been thinking of an Electric Brewery setup, here is your chance. And no waiting for the control panel or SS Brewtech Chronicals to come back in stock.
All the sourced components ran 7800.00.
Asking 6400, and reasonable offers will be entertained.
The system fits in a pickup, and we will meet a buyer within 100 miles of 05701, VT.
I welcome any serious inquiries to come take a look at the system.
Thank you!
The only thing left to do is drill two holes for the heating elements, and two holes for the hermes coil.
Components include:
1-Electric Brewery 50 amp Control Panel (currently sold out on Kals site)
2-4500w wave style immersion heating elements.
3-Color Coded Probes for HLT, Boil Kettle and Mash Tun.
1-Stainless Steel Hermes Coil.
3-16 Gallon Bayou Classic Kettles with Embossed Graduated Marking inside, two false bottoms and two hop screens.
2-Ss Brewtech Half Barrel Chronical Fermeters both with FTSS temp control setups. (also currently sold out at SS)
2- Chugger SS Inline Pumps with Quick Connect hose fittings.
1- MoreBeer Counterflow Chiller assembly with Inline thermometer and Quick Connect hose fittings.
1-Ultimate Sparge Arm with Quick Connect hose fittings. One Kettle lid has been cut to accommodate this.
1-Blichmann Hellfire Floorstanding Burner.
8-1/2 inch ball valves with qc hose fitti gs.
4- 4' Silicone hoses with qc hose fittings
1-6'Silicone hose with qc hose fittings
1-4'silicone hose
1-6'silicone hose
1- 5' long Stainless Brew Table on Casters.
2-5 gallon pails, 1 threaded lid
2-7 gallon pails
1-bottle tree
1-SS Mash Paddle
1-Captain Crush Grain Mill
Alot of spare o rings, threaded parts for ball valves and weld less entry into kettles, etc.
This is a fantastic system to make quality, repeatable brews on. If you have been thinking of an Electric Brewery setup, here is your chance. And no waiting for the control panel or SS Brewtech Chronicals to come back in stock.
All the sourced components ran 7800.00.
Asking 6400, and reasonable offers will be entertained.
The system fits in a pickup, and we will meet a buyer within 100 miles of 05701, VT.
I welcome any serious inquiries to come take a look at the system.
Thank you!
