• If you have bought, sold or gained information from our Classifieds, please donate to HomeBrewTalk and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Greenlee 1-5/8 Knockout Punch

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

DangersBrew

Well-Known Member
Joined
Jun 4, 2020
Messages
51
Reaction score
8
Want to buy or borrow a Greenlee 1-5/8 knockout punch for installing a 1.5 tri clover threadless fitting.
 
I've got a set in the classifieds that goes up to 1-1/4 pipe size which is 1.70". You'd have to ask the manufacturer of the fitting to see if 0.075" oversize (about 2mm) is close enough.
 
The hole size needs to be 41-42mm but the 1-1/4 would be a little large as it cuts about 43.5mm. Thanks though
 
Back
Top