• If you have bought, sold or gained information from our Classifieds, please donate to HomeBrewTalk and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

FS: Electrical Control Enclosures

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

PaulHilgeman

Well-Known Member
Joined
Mar 14, 2008
Messages
270
Reaction score
7
I have for sale 2 of these electrical control enclosures.

They have a hinged face, that locks in place with an allen-head screw.

They are 8.5 tall, 11" wide and 6" deep.

There are two conduit knock-outs on the bottom and the left, 6 on the top. The ones on the bottom and side each have one 7/8" knock-out and one smaller 3/4" knock-out. On the top, there are 3x of the 7/8" and 3x of the 3/4". There are also very large 1-1/8" knock outs that are already opened on the top and the right.

The front has some holes for buttons and LEDs.

They are pained with a very nice textured grey paint.

IMG_20110721_135125.jpg


IMG_20110721_135134.jpg


Shipping to the US should be about $15 anywhere in the 48 states.

I have no idea what these should cost, but lets say they would be $50 on-line, how about $25 each?

PayPal to [email protected]

Contact me with questions or to buy one at the same address.

Thanks,
Paul
 
Back
Top