macdadmorgan
Well-Known Member
Hello all,
I have conceded to the fact that I will never be able to finish building my dream brewery. I have almost everything you need, minus the heating elements, and some plumbing. Everything is brand new. I did not spare any expenses, I special ordered the kettles from Stout Tanks and Kettles all with butterfly valves, and tri clamps. The HLT, and boil kettle have tri clamp to hot water element thread fitting. Just need the elements and there associated wiring. The HLT has a tri clamp attached HERMS coil installed. The mash tun has a false bottom, and a sparge arm installed.
30A The Electric Brewery standard control panel. $2,295
3- The Electric Brewer temp probes tri clamp. $243
The Electric Brewery 30A control panel power cord. $89
More Beer tri clamp counter flow wort chiller. $280
Chugger Pumps center inlet ss 115v pumps x2. $380
Stout Tanks and Kettles HLT w/ Thermowell, Raised HERMS coil, sight glass, 1 element port, recirculation fittings, 1 butterfly valve. $860
Stout Tanks and Kettles 20g mash tun, w/ thermowell, falsebottom, recirculation fitting, sparge arm, 1 butterfly valve. $800
Stout Tanks and Kettles 20g boil kettle, w/ thermowell, sight glass, recirculation/Whirlpool fitting, heater element fitting, 1 butterfly valve. $601
This is what I paid for everything new. It is all still brand new, and looking for somebody to finish a dream brewery of their own. Everything is located in western Massachusetts, and I would prefer not to ship. I’m willing to entertain shipping, but it is going to be very pricey. Contact at
Macdadmorgan[at]yahoo.com
Willing to let everything go for $4,800
Thanks for looking.
I have conceded to the fact that I will never be able to finish building my dream brewery. I have almost everything you need, minus the heating elements, and some plumbing. Everything is brand new. I did not spare any expenses, I special ordered the kettles from Stout Tanks and Kettles all with butterfly valves, and tri clamps. The HLT, and boil kettle have tri clamp to hot water element thread fitting. Just need the elements and there associated wiring. The HLT has a tri clamp attached HERMS coil installed. The mash tun has a false bottom, and a sparge arm installed.
30A The Electric Brewery standard control panel. $2,295
3- The Electric Brewer temp probes tri clamp. $243
The Electric Brewery 30A control panel power cord. $89
More Beer tri clamp counter flow wort chiller. $280
Chugger Pumps center inlet ss 115v pumps x2. $380
Stout Tanks and Kettles HLT w/ Thermowell, Raised HERMS coil, sight glass, 1 element port, recirculation fittings, 1 butterfly valve. $860
Stout Tanks and Kettles 20g mash tun, w/ thermowell, falsebottom, recirculation fitting, sparge arm, 1 butterfly valve. $800
Stout Tanks and Kettles 20g boil kettle, w/ thermowell, sight glass, recirculation/Whirlpool fitting, heater element fitting, 1 butterfly valve. $601
This is what I paid for everything new. It is all still brand new, and looking for somebody to finish a dream brewery of their own. Everything is located in western Massachusetts, and I would prefer not to ship. I’m willing to entertain shipping, but it is going to be very pricey. Contact at
Macdadmorgan[at]yahoo.com
Willing to let everything go for $4,800
Thanks for looking.
