Flat Broke Brewing finds a home....

[Calfj60]

To start the story, we packed up our world 3.5 years ago and left it all behind in storage in a place called Los Angeles. We lived a few different places, Omaha, Milwaukee, Norman and decided it was time to find our home for part two of life. So here we are living in a much more rural place in the middle of our great county. We have a lake for a back yard and corn fields for our front yard. My collecting of brew supplies have been moved and collected dust long enough. The plan was take up some space in our three car garage and make a brewery space. Well after changing injectors in my diesel pick up on the 31st of December, it was 30 in the garage other options were put in motion.

The basement might work...the fact we have a basement is a dream come true for a guy born and raised in SoCal. So the cleaning and organizing began.

 

[Calfj60]

The space as it stands... the beginning. 13 x12 foot space

 

[Calfj60]

The wall is not load bearing and is merely being built to close up my space. Door is glass main with a wood frame. I will be plumbing in a sink, adding 50 amp sub panel and 6” vent.

 

[Calfj60]

Using pre primed shiplap.

 

[Calfj60]

Nice load of pallets, will be broken down and used to cover the I beam and hvac

 

[Calfj60]

Built these on Father’s Day.. mounted to the concrete on back and one end. Yes they will hold some weight.. I’m not a small man.. 290ish on a good day.. and this is where we stand today

 

[EcuPirate07]

Looking good so far!

 

[Genuine]

Great job!

 

[Transamguy77]

Can't wait to see how this progresses! Looks good so far!

 

[Redpappy]

Looking good.

 

[jcav]

Your off to a great start!

John

 

[Calfj60]

Thanks guys, will be back at work this weekend and will update the pictures

 

[Calfj60]

Got all the ship lap up, pretty happy with how it turned out.

 

[Calfj60]

Started boxing in the hvac and I beam

And the pallet wood is going up. Decided after covering this side I was going to drop the ceiling and cover some plumbing. Well I know nothing about drywall. So let’s see watch happens next.

 

[Boilinginsc]

Looks good! I’ve recently stumbled into drywall work on the house and found when muffing, a pan of water and window squeegees cut down on the sanding considerably.

 

[Calfj60]

Thanks for the advice, we will see how ambitious I get or how I finish the ceiling.. I have some other ideas...stay tuned

 

[Calfj60]

Sorry not much to update. Had family in town so not much progress. But did decide, no drywall just pallet wood ceiling.

 

[Calfj60]

Sorry for the rather long delay, been a busy summer but I’ve gotta get back on this if I wanna brew before 2020

 

[Genuine]

Now that looks bad ass! We'll be looking to get our basesment finished next year and I love that idea for the ceiling.

 

[Calfj60]

I’m pretty happy, but still have the other side of the ceiling to do. Then plumbing and electrical, then paint and getting it all moved in.

 

[Redpappy]

Have you figured out how to do your venting yet?

 

[Calfj60]

I think so, have the fan and a plan. It’s all gotta work before I close up the ceiling. But I think it should work, small run and 2 90’s and out the wall.

 

[Jaybird]

AWESOME! Good job on the pallet work! They are a serious PITA to take apart without a Sawzall!


Cheers
Jay

 

[Jayjay1976]

Gorgeous. Sounds like heaven to me.

 

[Calfj60]

The best thing that has happened to the project so far is finding the sawzall pallet video. I would have quit weeks ago as taking them apart with a hammer and crowbar is terrible, and I was loosing lots of good wood in the process.

 

[Jayjay1976]

The best thing that has happened to the project so far is finding the sawzall pallet video. I would have quit weeks ago as taking them apart with a hammer and crowbar is terrible, and I was loosing lots of good wood in the process.

Did I miss a link to the sawzall video?

 

[Calfj60]

This is what I watched

 

[Calfj60]

Well back at it, the small things tend to take forever, but I’m gonna do them one step at a time. Figured if I was gonna do some plumbing what not add a faucet / pot filler?

 

[Calfj60]

Sorry, here are the pics

 

[Calfj60]

Not a lot done, but get the wiring done on my lights and started wiring my plugs on the wall above the tables I will be using.