Quantcast

Fitting Help: 1/4" FFL to 1/2" barb

HomeBrewTalk.com - Beer, Wine, Mead, & Cider Brewing Discussion Community.

Help Support Homebrew Talk:

Dr. Francois

Well-Known Member
Joined
Jan 11, 2009
Messages
614
Reaction score
39
Location
Okemos, MI
I'm trying to create a shortcut device that takes primed, still beer from a keg and adapts to a 1/2" (large diameter) bottling wand. Essentially, I'd like to use my keg as a bottling bucket. The design I have in mind would also work with a racking cane to transfer beer to a keg in a closed system.

Before you comment, yes, I've done my due diligence by searching on this topic. In your responses, please keep in mind that I'm not trying to bottle carbonated beer, so a counter-pressure filler (e.g. BMBF) is overkill for me.

The setup would be basically like this:

Liquid Disconnect with 1/4" MFL --> (1/4" FFL to 1/2" barb fitting) --> 1/2" hose --> 1/2" bottling wand

So, my question: is there such a thing as a 1/4" FFL --> 1/2" barb fitting?
I've looked online and struck out so far.
 

zachattack

Well-Known Member
Joined
Mar 6, 2012
Messages
2,814
Reaction score
320
Top