beerwiffle
Active Member
All items in San Francisco. Will be traveling to LA at the end of the month and will move items if buyer pays deposit.
Brewpot 1: 8 gallon SS concord pot - $225
Electric Brewery heating element assembly (Pre-Assembled) Element: 4500W SS Ripple (ULWD) element
Cord length: 10 feet. NEMA L6-30 (250VAC, 30A) plug. All holes made with appropriate greenlee punches.
Brewpot 2: 8 gallon SS concord pot - $225
Electric Brewery heating element assembly (Pre-Assembled) Element: 4500W SS Ripple (ULWD) element
Cord length: 3 feet. NEMA L6-30 (250VAC, 30A) plug. All holes made with appropriate greenlee punches.
Brewpot 3 (HLT): 7.5 gallon aluminum bayou classic pot - $175
Electric Brewery heating element assembly (Pre-Assembled) Element: 4500W SS Ripple (ULWD) element
Cord length: 10 feet. NEMA L6-30 (250VAC, 30A) plug. All holes made with appropriate greenlee punches.
Mashtun 1: yellow 5 gal with Norcal false bottom with handle and ball valve/dip tube. $60
Mashtun 2: blue 5 gal with false bottom and ball valve/dip tube. $50
Mashtun 3: yellow 10 gal with AIH false bottom and ball valve/dip tube. $75
Avallon Beverage fridge with brewmaster edition 7 gal SS brewtech with both domed and regular lids. Norcal CO2 Harvester Kit. triclamp ball lock gas fitting for tranfers. A419 or A421 Johnson controls temperature controller. $500. (fridge alone was 2x more than this)
30 Amp GFCI - $100 - SOLD
50 Amp Midwest GFCI - new - $60
30 Amp controller. Auberins EZ boil. Plug for pump. 1 Element plug. Crydom SSR - $200
20 foot L14-3 10 gauge extension cord - $35
Nitro Setup - full Nitrogen tank. brand new nitrogen reg. Stout faucet and handle. - $200
Monster Mill MM2 with base and hopper- $150
Chugger Pump - Polysulphone - ball valve and camlocks - $75
X-Dry Series Chugger Pump (Center Inlet) - Stainless Steel - ball valve and camlocks - $130
OxyWand™ Oxygen setup and extra tanks - $50
12" Plate Chiller with camlocks and digital thermometer - $100
8" Plate Chiller - $50
1/2" High temp silicone tubing with camlocks
Taprite regulator with Air Distributor - 4 Way, With Check Valves. 1/4" hoses with ball lock connectors - $75
5 gal keg - $Free - Lid does not seal (all working kegs sold)
3 gal keg - $60 - 3 left
2 gal keg - $65 - 2 Left
1 gal keg - $70 - 2 Left
10 lb empty Aluminum CO2 tank - $75
Everything you need for homebrewing. All gear in excellent condition. Happy to package things together and discount. Have other items as well like carboys, fittings, kegs, stir plate, flask, fittings, etc.
Brewpot 1: 8 gallon SS concord pot - $225
Electric Brewery heating element assembly (Pre-Assembled) Element: 4500W SS Ripple (ULWD) element
Cord length: 10 feet. NEMA L6-30 (250VAC, 30A) plug. All holes made with appropriate greenlee punches.
Brewpot 2: 8 gallon SS concord pot - $225
Electric Brewery heating element assembly (Pre-Assembled) Element: 4500W SS Ripple (ULWD) element
Cord length: 3 feet. NEMA L6-30 (250VAC, 30A) plug. All holes made with appropriate greenlee punches.
Brewpot 3 (HLT): 7.5 gallon aluminum bayou classic pot - $175
Electric Brewery heating element assembly (Pre-Assembled) Element: 4500W SS Ripple (ULWD) element
Cord length: 10 feet. NEMA L6-30 (250VAC, 30A) plug. All holes made with appropriate greenlee punches.
Mashtun 1: yellow 5 gal with Norcal false bottom with handle and ball valve/dip tube. $60
Mashtun 2: blue 5 gal with false bottom and ball valve/dip tube. $50
Mashtun 3: yellow 10 gal with AIH false bottom and ball valve/dip tube. $75
Avallon Beverage fridge with brewmaster edition 7 gal SS brewtech with both domed and regular lids. Norcal CO2 Harvester Kit. triclamp ball lock gas fitting for tranfers. A419 or A421 Johnson controls temperature controller. $500. (fridge alone was 2x more than this)
30 Amp GFCI - $100 - SOLD
50 Amp Midwest GFCI - new - $60
30 Amp controller. Auberins EZ boil. Plug for pump. 1 Element plug. Crydom SSR - $200
20 foot L14-3 10 gauge extension cord - $35
Nitro Setup - full Nitrogen tank. brand new nitrogen reg. Stout faucet and handle. - $200
Monster Mill MM2 with base and hopper- $150
Chugger Pump - Polysulphone - ball valve and camlocks - $75
X-Dry Series Chugger Pump (Center Inlet) - Stainless Steel - ball valve and camlocks - $130
OxyWand™ Oxygen setup and extra tanks - $50
12" Plate Chiller with camlocks and digital thermometer - $100
8" Plate Chiller - $50
1/2" High temp silicone tubing with camlocks
Taprite regulator with Air Distributor - 4 Way, With Check Valves. 1/4" hoses with ball lock connectors - $75
5 gal keg - $Free - Lid does not seal (all working kegs sold)
3 gal keg - $60 - 3 left
2 gal keg - $65 - 2 Left
1 gal keg - $70 - 2 Left
10 lb empty Aluminum CO2 tank - $75
Everything you need for homebrewing. All gear in excellent condition. Happy to package things together and discount. Have other items as well like carboys, fittings, kegs, stir plate, flask, fittings, etc.
Attachments
-
IMG_4543.jpeg1.7 MB · Views: 89
-
IMG_4545.jpeg1.4 MB · Views: 82
-
IMG_4549.jpeg1.8 MB · Views: 74
-
IMG_4551.jpeg1.4 MB · Views: 64
-
IMG_4562.jpeg1.5 MB · Views: 67
-
IMG_4569.jpeg2.8 MB · Views: 67
-
IMG_4572.jpeg1.3 MB · Views: 64
-
IMG_4571.jpeg1.3 MB · Views: 63
-
IMG_4574.jpeg1.6 MB · Views: 75
-
IMG_4495.jpeg1.9 MB · Views: 75
Last edited: