• If you have bought, sold or gained information from our Classifieds, please donate to HomeBrewTalk and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Sold Electric HERMS Brewery - San Antonio / Austin, TX

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

ryanj

Supporting Member
HBT Supporter
Joined
Nov 19, 2017
Messages
248
Reaction score
88
dWBYyQ7.jpg
staP4iX.jpg


If you're looking to go electric, this is the deal you've been waiting for. I've decided to downsize my brewing operation so it's time to sell my eHERMS system. This system is turnkey, super clean, and built right. I average 80-85% mash efficiency. Here are all of the specs:

HLT (1/2BBL 15.5g Converted Keg)
- Every bulkhead is stainless steel and soldered.
- 25' stainless HERMS coil
- Stainless pickup tube
- Stainless recirculating arm
- 5500W heating element with TC clamp
- All ball valves are 1/2" stainless with cam lock fittings
- Temp probe installed in output port
- Polycarbonate sight glass

10 Gallon Mash Tun (Igloo Beverage Cooler)
- Stainless 1/2" ball valve with cam lock fitting
- Temp probe installed in input port on the lid
- Adjustable recirculation arm installed on lid
- Dome false bottom

Boil Kettle (1/2BBL 15.5g Converted Keg)
- Every bulkhead is stainless steel and soldered.
- Stainless pickup tube
- Stainless recirculating arm
- 5500W heating element with TC clamp
- All ball valves are 1/2" stainless with cam lock fittings
- Polycarbonate sight glass
- Temperature gauge

Custom built 25' counterflow chiller
- Soldered copper fittings
- Temperature gauge
- Stainless 1/2" ball valve with cam lock fittings

Two 110v pumps
- 2 Stainless 1/2" ball valve (one for bleeding and one for pressure regulating)
- Cam lock fittings

240v 30amp Brewing Control Panel
- E-HERMS Brewery Build Forum

Misc
- 5x high temp silicone hoses with female cam lock fittings
- 2x 10awg power cables with twist lock connectors
- 2x thermometer probe wires
- Wooden brewstand (if you want it)


Full album of pictures:


$1,000 FIRM
Located just outside San Antonio, TX.
 
Last edited:
Top