brewinginct
Well-Known Member
- Joined
- Apr 26, 2009
- Messages
- 183
- Reaction score
- 3
My first beer has been fermenting for 8 days now and I just tested the gravity. I cleaned my wine thief with soap and water and then sterilized it in bleach water for 30 minutes. I only cleaned the hydrometer/hydrometer tube with soap and water because I didn't plan on dumping the wort that I tested back into the primary bucket.
I only stuck my hydrometer halfway into the primary bucket so that I didn't get any yeast in my sample and I did this about three times before I realize: the tip of my wine thief is touching the inside of my hydrometer test tube every time I empty it, that the inside of said tube hasn't been sterilized, and that the tip of the wine thief was dipped back into my fermenting beer two times after touching the hydrometer tube.
Did I just contaminate my first beer by doing this? It's such a small point of contact but it seems like that might be all it takes. Am I worrying about nothing?
Second question: According to the hydrometer reading my beer still has a little bit more to go before the fermentation is done. It's almost there, maybe a few more days and it'll be done. It tastes pretty good so far, but it's still pretty sweet tasting. This is probably because it's not done fermenting but so far this beer is lacking the floral/grapefruit/citrus taste I was shooting for.
I'm now transferring from primary to a secondary glass carboy and dry hopping. If I drop hop in the secondary will this achieve that hoppy finish I am shooting for? And if so, what hops would people recommend I use? Maybe more cascade hops? My recipe is posted below. Thanks in advance!
-6 lbs. 9 oz. of Light/Pale Malt Extract Syrup
-3 lbs. Light Dry Malt Extract
-8 oz. Caramel/American Crystal 80L
-1 oz. Pilgrim hops
-1 oz. Columbus Hops
-2 oz. Cascade Hops
I only stuck my hydrometer halfway into the primary bucket so that I didn't get any yeast in my sample and I did this about three times before I realize: the tip of my wine thief is touching the inside of my hydrometer test tube every time I empty it, that the inside of said tube hasn't been sterilized, and that the tip of the wine thief was dipped back into my fermenting beer two times after touching the hydrometer tube.
Did I just contaminate my first beer by doing this? It's such a small point of contact but it seems like that might be all it takes. Am I worrying about nothing?
Second question: According to the hydrometer reading my beer still has a little bit more to go before the fermentation is done. It's almost there, maybe a few more days and it'll be done. It tastes pretty good so far, but it's still pretty sweet tasting. This is probably because it's not done fermenting but so far this beer is lacking the floral/grapefruit/citrus taste I was shooting for.
I'm now transferring from primary to a secondary glass carboy and dry hopping. If I drop hop in the secondary will this achieve that hoppy finish I am shooting for? And if so, what hops would people recommend I use? Maybe more cascade hops? My recipe is posted below. Thanks in advance!
-6 lbs. 9 oz. of Light/Pale Malt Extract Syrup
-3 lbs. Light Dry Malt Extract
-8 oz. Caramel/American Crystal 80L
-1 oz. Pilgrim hops
-1 oz. Columbus Hops
-2 oz. Cascade Hops