Conical to keg closed transfer. Fittings.

HomeBrewTalk.com - Beer, Wine, Mead, & Cider Brewing Discussion Community.

Help Support Homebrew Talk:

jdebonth

Well-Known Member
Joined
Mar 14, 2013
Messages
51
Reaction score
3
Has anyone found a better way to do this then in the attached picture? The tubing around the liquid out post is not fully sealed due to the thread spiral (could easily suck in some o2), and the hose on the 1/2" tri clamp nipple barely fits. There must be a "right" way to do it, but I haven't found the fittings...

image.jpg
 

BorderBrewer

Well-Known Member
Joined
Jul 19, 2008
Messages
54
Reaction score
12
Hi,
Get some Barbed Swivel Nuts for Ball Lock Disconnects 1/4" MFL. These are available from many suppliers.
Brewhardware also sells TC to 1/4" MFL adapters. Not sure if he has them smaller than 1.5" TC though, but you can check with him.
 

jddevinn

Got 99 Problems but beer ain't one
HBT Supporter
Joined
Feb 14, 2010
Messages
1,410
Reaction score
545
Location
Concord
Silicone hose also works better. If its too tight like on your barb dip it into some hot water for a second.
 
Top