Dougan
Well-Known Member
The brewing setup is pretty much everything you would need to get up and running with a full all-grain brewing setup. It's not as fancy as some of the kits you see here, but I brewed several times a month for several years just fine with this setup, so it's definitely enough. Everything is here, although it's been sitting a while so some of the nick nacks might need replacing, and everything's collected some dust in my shed so a good cleaning is in order.
As far as the kegging system goes, it's everything you need (besides a chest freezer or fridge) to get set up with a full kegging system with two taps and two spare kegs in reserve.
Brewing:
Mash Tun
Buckets (3) and Better Bottle (1) -- need cleaning
Propane Burner (YMMV, worked last I used it)
Half Barrel pot (no fancy spigots or anything, just a half barrel with the top cut off, but it does the job)
Copper immersion wort chiller
Bottle Capper
Bottles
Random equipment-- racking tubing, stirring stick, airlocks, bung, odds and ends etc.
Kegging:
4 corny kegs (only 1 pictured, but I have 3 more, all ball lock but different appearences)
2 perlick faucets with shanks handles tubing etc
CO2 tank and gauges -- note that the tank is rather old and some places do not fill up older tanks. Some do. YMMV
Keezer collar-- it fit my chest freezer, probably won't fit yours but you're welcome to take it and see
Johnson Controls A419 thermostat for regulating chest freezer to beer temperature
I'm looking to get $300 for both. I'm not looking to split into pieces but I'd consider separating the brewing and kegging systems.
As far as the kegging system goes, it's everything you need (besides a chest freezer or fridge) to get set up with a full kegging system with two taps and two spare kegs in reserve.
Brewing:
Mash Tun
Buckets (3) and Better Bottle (1) -- need cleaning
Propane Burner (YMMV, worked last I used it)
Half Barrel pot (no fancy spigots or anything, just a half barrel with the top cut off, but it does the job)
Copper immersion wort chiller
Bottle Capper
Bottles
Random equipment-- racking tubing, stirring stick, airlocks, bung, odds and ends etc.
Kegging:
4 corny kegs (only 1 pictured, but I have 3 more, all ball lock but different appearences)
2 perlick faucets with shanks handles tubing etc
CO2 tank and gauges -- note that the tank is rather old and some places do not fill up older tanks. Some do. YMMV
Keezer collar-- it fit my chest freezer, probably won't fit yours but you're welcome to take it and see
Johnson Controls A419 thermostat for regulating chest freezer to beer temperature
I'm looking to get $300 for both. I'm not looking to split into pieces but I'd consider separating the brewing and kegging systems.
