General_Jah
Well-Known Member
- Joined
- Aug 29, 2015
- Messages
- 54
- Reaction score
- 3
Hey guys I recently built a new all electric 20G brewery and decided to switch out some of my full port ball valves from brewers hardware with three way stainless steel valves off amazon - which have turned out to be real pieces of crap. Wish brewers hardware carried these but alas they don't.
The problem I am running into is the valve doesn't seem to have a really good seal so it will actually have a slow leak on many of the three-way valves I have purchased and unfortuantely returning them is not an option. If they are all connected with hosing its not a big deal but when they are not, which is definitely part of the time, some of them leak.
I've never encountered this before and am wondering if any of you guys know of some way I might try to fix this issue.
Here is a link to the product - https://www.amazon.com/gp/product/B00O5D1ARU/?tag=skimlinks_replacement-20
Any advice on how to try and fix this would be greatly appreciated.
The problem I am running into is the valve doesn't seem to have a really good seal so it will actually have a slow leak on many of the three-way valves I have purchased and unfortuantely returning them is not an option. If they are all connected with hosing its not a big deal but when they are not, which is definitely part of the time, some of them leak.
I've never encountered this before and am wondering if any of you guys know of some way I might try to fix this issue.
Here is a link to the product - https://www.amazon.com/gp/product/B00O5D1ARU/?tag=skimlinks_replacement-20
Any advice on how to try and fix this would be greatly appreciated.
Last edited by a moderator: