Quantcast

Build your own bulkhead fitting...help?

HomeBrewTalk.com - Beer, Wine, Mead, & Cider Brewing Discussion Community.

Help Support Homebrew Talk:

ddroukas

Well-Known Member
Joined
Dec 13, 2007
Messages
60
Reaction score
1
Location
huntsville, alabama
I found a local plumbing store that had 1/2" nipples and couplings for WAAAY cheaper than what I've been paying via northernbrewer (of course). I only now need the o-rings, stainless washers, and lock nut.

I'm building this:
http://www.northernbrewer.com/pics/fullsize/kk-bulkhead.jpg

And here are the McMaster-Carr parts I've put together; tell me if they'll work:

9396K431 - Silicone O-rings (fits 11/16" OD tube, 0.863" ID and 1.095 OD)
98126A662 - SS Washers (7/8" ID, 1_3/8" OD, 0.03" thick)
4429K124 - Brass Lock Nut (1/2", 14 threads/inch, 1/4" thick)
 

Latest posts

Top