ungod
Active Member
Purging equipment from recent upgrades, make an offer if you buy the whole lot, $675 for everything (over $1000 in equipment) pictures of each item below:
NorCal Brewing (Jaybird) stainless steel false bottom with upgraded handle. Approx 15.5" diameter and 2" tall. Used in 15 gallon Megapot mash tun. $90
20 gallon megapot boil kettle with thermometer, 2 valves and dip tubes for whirlpooling. Capable of doing both 5 and 10 gallon batches. Holes are created for electric element and PID. $275
15 gallon Megapot - drilled for electric hot liquor tank $175
2 Temperature probe cables - red and orange cables 6 feet long $30/each or $50 for both
Hopstopper - boil kettle hop filter with bulkhead and compression fitting $90
CIP Spray Ball - ss brewtech - 3" triclamp with 1/2" NPT $30
(2) 3/8” kent female quick disconnect - temperatures up to 250 degrees and pressure up to 125 psi. used these for glycol lines with chiller. only need to buy male connectors online to complete them. $3/both
Stainless Steel threaded fittings - $35 ($67 worth of parts)
1/2” MPT x FPT 90degree street elbow
1/2” threaded hose barb full bore high flow
Ss Brewtech hose barb 1/2” to 1/2” FPT
Stainless steel tubes
(2) 1/2” compression x 1/2 MNPT
1/2” MPT nipple
1/2” FPT tee
(3) 1/2” cam lock x 1/2” female NPT
NorCal Brewing (Jaybird) stainless steel false bottom with upgraded handle. Approx 15.5" diameter and 2" tall. Used in 15 gallon Megapot mash tun. $90
20 gallon megapot boil kettle with thermometer, 2 valves and dip tubes for whirlpooling. Capable of doing both 5 and 10 gallon batches. Holes are created for electric element and PID. $275
15 gallon Megapot - drilled for electric hot liquor tank $175
2 Temperature probe cables - red and orange cables 6 feet long $30/each or $50 for both
Hopstopper - boil kettle hop filter with bulkhead and compression fitting $90
CIP Spray Ball - ss brewtech - 3" triclamp with 1/2" NPT $30
(2) 3/8” kent female quick disconnect - temperatures up to 250 degrees and pressure up to 125 psi. used these for glycol lines with chiller. only need to buy male connectors online to complete them. $3/both
Stainless Steel threaded fittings - $35 ($67 worth of parts)
1/2” MPT x FPT 90degree street elbow
1/2” threaded hose barb full bore high flow
Ss Brewtech hose barb 1/2” to 1/2” FPT
Stainless steel tubes
(2) 1/2” compression x 1/2 MNPT
1/2” MPT nipple
1/2” FPT tee
(3) 1/2” cam lock x 1/2” female NPT
Last edited: