Bottling from keg

[Peterschroder]

Hi, I have pin lock kegs and want to bottle from them. I bleeded the co2 and brought it to 3psi. Put a racking cane onto my beer line and started filling the bottles. Still had a lot of foam coming into the bottle. Any recommendations out there?

 

[rgarry]

There is a sticky on here on how to do it. If I find it I will post it. I use a beer gun.

 

[Peterschroder]

There is a sticky on here on how to do it. If I find it I will post it. I use a beer gun.

Thanks, found the sticky, will try it following that procedure.

Cheers!

 

[hunter_le five]

Thanks, found the sticky, will try it following that procedure.

Cheers!

That method works like a champ. :rockin: Good luck.

 

[djt17]

Make sure your bottles are as cold, or colder then your beer. I don't even turn down the gas anymore; as long as my bottles are cold, I get very little foam.

 

[Emilywang]

try to make your beer keep 0-5 Celsius degree when you filling into bottles. Most times, the filling temp is 0-4 or 0-5 Celsius degree.


Emily