Anyone build a bar w/ a Kegerator and Taps?

[Torchiest]

Damn, guys, this bar porn is getting hotter and hotter.

 

[mmb]

Really? I did Pergo laminate and it practically installed itself. The only hassle in working with it was that it ate my saw blade over the course of the project.

A flooring guy I know let me borrow his laminate cutter when I put mine in. Looks just like a brick splitter and worked great on the end cuts. I'd never install again without one.

I had long runs on this project and everytime I got three or four boards together the whole row would pop off. Very frustrating when you are working by yourself at 2 in the morning.

 

[Cape Brewing]

yeah, I'm pretty sure i didn't need a permit... Maaaaaybe I should have gotten one for the electrical but even that I doubt. In my area, it's pretty much if you're going to make any structural chnges to the house, the footprint of the house or if yoiu're going to make a lot of noise that would bother the neighbors, you're supposed to pull one. I didn't do any of that.

"Bar porn"... that's funny...

 

[vincemash]

great ideas here

 

[Cape Brewing]

the url in that other post (barplans.com) was not correct, it led me to a bunch of adwords, Here is a site with lots of bar plans and ideas. The completed bar pictures are great for ideas:

Home Bar Plans

Holy crap! one of the bars they show scrolling through belongs to a guy in my brew-club and I'm seeing him tonight.

that's crazy... I didn't think he got any "plans" for it so I gotta ask him if he actually used that site.

 

[Dunk]

My Magic Chef does not seem to be tall enough for corny kegs (23"). How is the freezer unit removed from this refrigerator safely?

Greg

 

[dataz722]

The freezer unit usually cant be removed because it is what actually cools the entire thing.

 

[jimmcs06]

I have a wetbar in my home which is located next to the crawlspace, so I put a chest freezer in there, ran pvc pipe from the freezer to the wall, took a wooden 5 gallon keg and cut it in half, put the valve/fawcet on the end of the keg, ran the keg line inside the pvc pipe. works very nice. would post pics, but I don't see how to do that.

 

[jimmcs06]

I was able to upload pics of wetbar on mygallery