zachmd2019
New Member
- Joined
- Jun 4, 2019
- Messages
- 2
- Reaction score
- 0
Brewstand: I made myself out of pressure treated lumber. It is on casters and rolls pretty easily despite the weight. I had to keep it outside at my last house, so it comes with a cover as well. In the picture there is only one propane burner on it, I have another (pretty rusted) that can go with it as well if you want it. It is plumbed with a whole house 10" water filter and a quick connect for the hose.
HLT: A keggle with pick up tube, thermometer, sightglass and HERMS coil. All have Camlock fittings.
MT: A keggle with perforated grate, thermometer and homemade sparge arm.
BK: A Keggle with whirlpool and pickup tube.
Hose: I didn't measure them, but the largest two hoses have high flow 1/2"elbows with camlocks, the next size down has straight camlocks and the shortest has one camlock(I usually used to go into the fermenter.) This is plenty when running the system. All are camlock fittings and I will throw in some extra camlocks I have as well.
Pumps: 2 March 809-PL-HS-C Pumps. Both run well and were just tested. They run off a regular outlet. The extension cord off the back of the brewhouse runs into plugs that are controlled by the switches on the front.
Misc: I have a ton of other stuff that you may or may not be interested in. Homemade Immersion Chiller, Carboys, Better Buckets, Fermentation Chamber etc. These could all be included for the right offer. I am in no hurry to sell, so please no low ball offers. I would prefer to sell in one lot and not split up. Cross Posted. It will need to be picked up, 20778. $1200/OBO