Quantcast

All Grain brewing is simple

HomeBrewTalk.com - Beer, Wine, Mead, & Cider Brewing Discussion Community.

Help Support Homebrew Talk:

AleHole

Well-Known Member
Joined
Jan 4, 2007
Messages
339
Reaction score
5
Location
Seattle
I am posting this thread to describe my first few AG batches after several extract batches.

After much research on various websites, books, and forums I decided that I wanted to give All Grain brewing a try and decided on the batch sparge method. I figured the worst that could happen is that is I would be out 20 bucks for grain and a few bucks for material to convert an old cooler into a mash/lauter tun. I felt like most extract brewers that have never brewed AG before that it was very hard and I was actually kinda intimidated. Well after my first batch I seriously asked myself why all the fuss? It really is simple and in my opinion easier than extract and lots more fun because you are not making beer using premade syrup.
Basically all you are doing is soaking crushed grain in hot water for an hour (the mash) and draining the runnings into your boil pot. After that you perform the sparge wich is basically soaking the grains in more hot water for 15 minutes and draining again. You have just made AG wort. Simple. The hardest part about the whole process is making sure you have the right temperature water and adding the correct amount of water per lb of grain (1.3 quarts water per 1 lb of grain is a good number). So I am encouraging anybody that is intimidated by All Grain brewing not to be. It really is easy. Here are some great resorces that completely helped me understand and brew my first AG wort.

http://hbd.org/cascade/dennybrew/

http://www.howtobrew.com/section3/index.html

My advice is keep it simple and and don't worry. It really is hard to screw up beer bad enough not to drink. Chances are it will be your best batch ever. One downside for some people however is that you do have to be able to boil full 5 gallon batches, so getting a keggle or bigger brewpot is essential.

CHEERS:mug:
 

zoebisch01

Well-Known Member
Joined
Nov 15, 2006
Messages
5,180
Reaction score
11
Location
Central PA
Nice. AG rules the night! :D Getting the process is indeed simple and is more daunting in perception than it is in reality. You could spend a lifetime perfecting it though :) Also, you could spend a lifetime being too afraid to ever take the plunge.
 

Fiery Sword

Well-Known Member
Joined
Oct 16, 2006
Messages
907
Reaction score
4
Location
Revere, MA
nice post. it realy can be as easy as you want to make it. i did a 2 step mash with an IPA the other day and it was like my spreadsheet could do no wrong. more importantly, it was the smoothest fly sparge i've ever done. it was one of those beautiful days where everything works perfectly. (good deal, because two weeks ago a pilsner clogged up by FB THREE times during the sparge. my efficiency was horrible - i needed an easy brew day!)

good stuff!
 

cweston

Well-Known Member
Joined
Feb 2, 2006
Messages
2,014
Reaction score
23
Location
Manhattan, KS
I basically agree.

The biggest barriers to AG, IMHO, are the time investment and the need to be able to boil larger amounts of water and wort. As you say, the equipment costs can be modest, and it's not rocket science.

The biggest issue for me is time. Whe I did extract batches, I could brew in the evening. I get up at 5:30 in the morning, so brewing until past midnight just simply isn't a viable option for me more than a few times a year.
 

GoatFarmersInternational

Well-Known Member
Joined
Oct 8, 2006
Messages
126
Reaction score
0
Location
Goat Falls, MT
I must say that after my first reading of CP's description of AG in The Joy, I was confused as all hell about it... This forum has resolved a lot of that confusion, so much so that I'll be doing my first AG batch on Friday. So many thanks to all you, and may I never have to buy LME again.

:mug:
 
OP
A

AleHole

Well-Known Member
Joined
Jan 4, 2007
Messages
339
Reaction score
5
Location
Seattle
One other advantage is that an AG batch is cheaper than extract. I was spending close to 30 dollars for 1 extract batch. Now my batches are under 20 bucks and that includes liquid yeast! And for those that say they do not have room....if you have a small patio or front porch or something similiar then you have room. All you need is room to boil outside and thats not much space. As far as storage, 1 Boil kettle, 1 hot liquor tank(to heat your hot water for the mash and sparge) ,1 converted cooler and a burner.
 

jezter6

Well-Known Member
Lifetime Supporter
Joined
Nov 1, 2006
Messages
4,287
Reaction score
15
Location
DARLINGTON
If I can go AG, ANYONE can go AG.

I didn't have any help outside of this forum either. I just made a decision to go for it after I got my equipment. I was intimidated (like most new brewers) about AG and thought it required all kinds of equipment and calculations and scientific knowledge. Boy was I wrong.
 

desiderata

Well-Known Member
Joined
Jul 28, 2006
Messages
521
Reaction score
3
GoatFarmersInternational said:
I must say that after my first reading of CP's description of AG in The Joy, I was confused as all hell about it... This forum has resolved a lot of that confusion, so much so that I'll be doing my first AG batch on Friday. :mug:
Yeah, reading that was like reading a chemistry textbook. :confused:
I like reading about AG here, cuz it's put in more laymans' terms. Now, if I go back and reread that book, I'll probably understand a lot more, but no where near what I would learn from here.

My biggest hurdle is the equipment, cuz when it comes to DIY or mechanical stuff, I suck! I'll really have to have things spelled out for me. I'll probably end up printing off the photos of the devices needed, and showing that to the employee at the hardware store and saying, "here, this is what i need."

I'm still at least a month from doing my first AG batch (or getting the equipment), but at least I can educate myself about it by then.
 

joshpooh

Well-Known Member
Joined
Feb 18, 2007
Messages
326
Reaction score
1
AG is undoubtedly easier than it sounds once you actually do it. Only drawback is how long it takes. This is the main reason I still brew extract about half the time. Sometimes you just don't have the time to brew all grain.
 

sudsmonkey

Well-Known Member
Joined
May 30, 2005
Messages
1,238
Reaction score
8
Location
Deepest, darkest Eastern NC
I made many batches of extract before trying AG. I read Dave Miller's book on homebrewing and it scared the heck out of me. He went into the science of brewing far more than I needed and described enough temp rests and the reasons for them to choke a horse. I thought the equip. would be expensive.
My local guy at the HBS talked me through a single infusion mash. Sounded simple enough. I cobbled together a system from a keg I had, a cooler and some pvc pipe, and the old stove from our sailboat. I'll never go back to extract now! First, there's the matter of cost. I can now brew for half as much as I could before. Secondly, it's a matter of principle. I feel like it'd be like putting the training wheels back on the bike. The added time investment doesn't really bother me either. I just love brewing.:mug:
 
Top