• If you have bought, sold or gained information from our Classifieds, please donate to HomeBrewTalk and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Michigan 120V/20A RIMS Controller

Homebrew Talk

Help Support Homebrew Talk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

micraftbeer

Supporting Member
HBT Supporter
Joined
Dec 30, 2015
Messages
953
Reaction score
706
Location
Farmington Hills, MI
$145

Brew-Control 120V controller with L5-20 plug to run your element (up to 2250W), and a grounded 3-prong receptacle to run your pump. The PID controller has set point temperature adjustable to the nearest 0.1 degrees F, and has an auto-tune feature to automatically tune your PID gains for you. It uses a unique temperature sensor with a robust XLR connection, and temperature accuracy that Brew-Control brags is 0.2 degrees at a mash temperature of 150F.

This controller has worked fine for me, no issues. I've had it for a year, and used it for about 5 batches. I've gotten other equipment/controllers and never use this one, so looking to pass it on to someone at a good price, since these things always seem so darn expensive. This sells for $280 new on Amazon.

http://brew-control.com/wordpress1/controllers/mash-controllers/

https://www.homebrewfinds.com/2019/...ing-infusion-mash-system-tube-controller.html

https://www.amazon.com/Electric-Rec...inements=p_6:A2PUDKB6S5DQAJ&s=kitchen&sr=1-12

IMG_20200314_170514929.jpg
IMG_20200314_170508343.jpg
IMG_20200314_170526874.jpg
IMG_20200314_170535847.jpg
IMG_20200314_170545573.jpg
IMG_20200314_170553961.jpg
IMG_20200314_170601573.jpg
 
Back
Top