Search results

http://think.gusius.com/diy-keg-floating-dip-tube-mk3/

#008C4A The PCB color code for green is #008C4A. Green color lends clarity to the printed circuit board, because white colored text on it will produce brilliant contrast, thereby enhancing readability. CMYK 100%, 0%, 47%, 45%

https://www.homebrewtalk.com/threads/my-fermentrack-build.665245/post-8579507

https://www.diyhomebrewers.com/2020/09/floaty-wifi-hydrometer-montaje-y-como.html

what parts get scraped off?

I love my Ender 3-I got a good deal on it. I bought the laser add on and want to trick it out with Octoprint and all the other bells and whistles

I was reading people are upset there is no Wi-Fi.

So there is nothing special about this board? I can get them for 2 bucks here in California

This looks interesting Raspberry Pi Pico: Tutorials, Pinout, Everything You Need to Know

I got an Ender 3 for Christmas and been having fun printing out stuff. Lots of enclosures for all of my STC1000+ and ESP32-Cams.

Is there a link for this board?

I thought the Float was a DIY project- I guess I was wrong

I was asked about the safety of beer coming in contact with the 3d printed filament sensor box. Is the box coated in food-safe epoxy?

Post a picture of both boards -might make it easier for someone to help For reference

Have you tried to solder the sensor directly to the PCB?

Yes, thorraks PCB uses 3v and goes through the r1 resistor. the resistor is 10k maybe that is the problem. remove the resistor and solder in a 4.7k and see if it works. I haven't had any problems with my boards running 10k so I'm curious to see if that works.

If something did go wrong with the resistors and Mosfet wouldn't it mostly be a case of something not getting power?I wonder about this sometimes.

I use the same PCB with the same resistors and all of my boards work- These resistors' values were from the BOM for this board.🙂. I got a feeling there are some problems with the wiring at the RJ-45 jacks.I know when I wired mine up I had a hard time figuring out the wiring. I would also run the...

Just to double-check- power is only coming from the screw terminals on the mother PCB? The D1 mini is not connected via the USB connector. I would connect power to the motherboard and then check the voltage with a voltmeter at the various points on the board before I plugged in another D1. What...