Search results

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. inkbird

    Inkbird ITC-308 Failed again - woke up to frozen beer

    Hey! You need to check the probe. Make sure the probe and cables intact and try to clean the probe and cable, then use a hairdryer to dry the entire unit for a while, then test the probe in the air temperature. After you complete the above steps check whether the reading is accurate.
  2. inkbird

    ITC-308 wifi is always heating or cooling

    Hey there! You should be get it wrong.. According to your settings, heat will go on at 62, will be off at 64. cooling will go on at 74, will be off at 64. As for the reading problem, please put the probe to another place and see if the reading is accurate.
  3. inkbird

    Itc 308 plugs don’t work

    Hey Rod, Can you tell me your settings? We can help you with that
  4. inkbird

    ITC-308 wifi is always heating or cooling

    Hi, we just check with our engineering team. And here is the details: After setting the parameters, save or exit or power on for the first time, it enters heating or cooling according to the TS value, not based on the difference value. Then when the heating or cooling is turned off, the...
  5. inkbird

    ITC-308 wifi is always heating or cooling

    Hi, everyone, we sincerely apologize for the inconvenience. We have already reported to our engineering team, we will try our best to solve the problem. We will keep you posted. Thanks for your patience.
  6. inkbird

    Inkbird warranty service?

    Hi friend, sorry for your inconvenience. We didn't get your message. Please PM me you order ID. Our warranty is one year. I will help you to deal with this problem.
  7. inkbird

    Ink-Bird IBS-TH1 Review (Limited and hopefully ongoing)

    Hi, I know why you cannot connect with you phone. Because you are pairing in your Bluetooth page. You just need to open your Bluetooth. And do not paring in you Bluetooth page. Then go to Engbird app and pairing in this app. You can see the video. We just open the Bluetooth and go to the app...
  8. inkbird

    Ink-Bird IBS-TH1 Review (Limited and hopefully ongoing)

    Thanks for your feedback. For your first question, the battery can be replaced easily. Here is a video to show how to change. And for the connecting problem, there is no need for a pin. Firstly, open the Engbird app and your Bluetooth, then press the Add Sensor button. There will appear a...
  9. inkbird

    Inkbird ITC-310T, ITC-308 or ITC-306T. Which is the best for you

    Good questions. You can't manually operate after you set it. You need to reset. Thanks.
  10. inkbird

    Inkbird itc-308? $35 gets you wired, 2 stage temp controller.

    The voltage is wide from 100V TO 240V. It is safe within this voltage. Pls don't worry.
  11. inkbird

    Terminology overload: keezer, ferm chamber, etc.

    here is the longer probe. You can consider it. http://www.amazon.com/gp/product/B01A51OLR6/?tag=skimlinks_replacement-20
  12. inkbird

    Inkbird itc-308? $35 gets you wired, 2 stage temp controller.

    This one can fit your need. Six periods of time programs. http://www.amazon.com/dp/B019Q3K4EI/?tag=skimlinks_replacement-20 More details is here. http://ink-bird.com/asset/file/ITC-310T_%20Manual_%20V1.5b.pdf Thanks.
  13. inkbird

    Inkbird itc-308? $35 gets you wired, 2 stage temp controller.

    Thanks for your definition about our items. We will try our best to improve our item and research more items for you.
  14. inkbird

    Inkbird itc-308? $35 gets you wired, 2 stage temp controller.

    Higher Voltage? Our pre-wired thermostats all are 100 - 240V. Is it ok for you? Or you meant the larger electric current? We are researching to wire the PID thermostats with F display. We think PID thermostats are good for larger electric brewing. It will be released after we test well.
  15. inkbird

    How to connect 12" Probe sensor to ITC-308/ITC-1000 ECT

    We have realized that some brewers were favored with the longer sensor's probe. We have produced a small bulk of 12" probe sensor. It can work with Inkbird ITC-1000, ITC-308, ITC-306T, ITC-2000, ITC-310T. http://www.amazon.com/dp/B01A6DIPFM/?tag=skimlinks_replacement-20 Here are some pictures...
  16. inkbird

    Inkbird itc-308? $35 gets you wired, 2 stage temp controller.

    We have replied you on Amazon and our email address. Replacement is available.
  17. inkbird

    12 inch probe is good for 5-6 bung stopper with room for an airlock?

    Great. It works. I will tell my customer. Thanks again.
  18. inkbird

    12 inch probe is good for 5-6 bung stopper with room for an airlock?

    Someone asked us about this 12 inch probe. Is it good for 5-6 bung stopper with room for an airlock? We tried to soaked it to one container which is about 5L and found it reached near an half of it. So what are your opinions?
  19. inkbird

    Inkbird itc-308? $35 gets you wired, 2 stage temp controller.

    This one may be good. ITC-308S has 12 inch probe. http://www.amazon.com/dp/B01A51OLR6/?tag=skimlinks_replacement-20
Back
Top