Search results

Thanks for this reply existing... I read the entire thread since I had not made this in a few years and wanted to use bulk chemical company products (bell chem) for some of it. I did not see a spreadsheet anywhere, so I made one for bulk chemicals with 7th gen added My spreadsheet is shared...

I have a TE-5K-MD with a .2HP Baldor motor I got for $35 on eBay 6 years ago, it shoots water 12 ft into the air through a St. Pats keg cleaning sprayball.... I could use it for a 7bbl fermenter with that sprayball. I also have what I think is the same pump head on one of the new AC-5 Beer...

Walter is right, these are great pumps at high temps in a closed system. If you are trying to pump any liquid near its boiling point in an open system like brewing, however, your plumbing needs to be proper. Are you having problems only when the kettle is being heated and at 190? It is likely...

here is the info for the St. Pats one I have: http://www.stpats.com/oakbarrels.htm#beerkegtools Barrel Cleaning Nozzle $69 304 Stainless Steel. 3/4" FPT. Outside diameter 1.4" Spins best in vertical position (either up or down). Pressure/Flow: 20-40 psi and 8-15 GPM other sprayballs are...

I do not think the 809 will function with a sprayball very well, a 325 does OK on my spinning, keg-cleaning sprayball I got from St. Pats, but I really like the way a TE-5 march pump spins it for CIP... For CIP, a TE-5x-MD will work great, and a TE-5.5x-MD is awesome... Interested to see what...

you can: 1 - throttle back the outlet with a valve to reduce the sucking of air via the tendency to whirlpool near the suction at the end of pumping 2 - use shorter line 3 - use smaller line (especially on the outlet of the pump) to get higher flow rate and overcome air bubbles. 4 - manually...

How much of the stroke of the 6" cylinder do you actually use with your lever?

I agree with the 'recirculate the wort through the chiller until temp not dropping any more', then 'use a $30 harbor freight sump pump in a bucket of ice water' to take from there...' method... I have two therminators to do the series thing with hose water in one and icewater in the other and...

Depco has been GREAT for anything I have ever needed!

Walter, do you guys have a clear 809 pump housing you can take a video of it cavitating during various mounting positions? That would really show people what is happening...

17 5-gal 2 3-gal 2 10-gal 2 15-gal sankeys with corny tops 2 upside down sankeys with plugged holes and new elliptical holes for corny lids...

So when does this patent expire? After that they should come down to the retail price of a 3-piece airlock and an auto-siphon $2-$10 and I will own 10-20 of them...