Search results

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. spoonyluv

    For Sale Corny kegs for pickup in Alameda, CA ($30 each or 4 for $100)

    I have 4 kegs, all ball lock, in good shape (2 of them I bought new 7 years ago and are in great shape), all seal fine. $30 each, $100 for all 4.
  2. spoonyluv

    For Sale Kegging gear in SF bay area - kegs, mill, regulator, shanks with faucets

    Selling kegging gear, local pickup only in Alameda, CA. Added - Monster mill 3 in very good condition with base and hopper - $100 4 ball lock corny kegs (2 were bought new and are in great shape) - $50 each 4 way manifold - $20 4 way secondary regulator - $75 5 shanks with faucets for keezer...
  3. spoonyluv

    California Keezer with compressor problems cheap - $100

    Selling a keezer based on a Kenmore 8.8 cu ft chest freeezer. I built the collar myself 8 years ago and have been using it since for commercial and homebrew kegs. The freezer itself no longer cools below 50 degrees so it needs to be fixed or replaced. The collar that I have is not attached to...
  4. spoonyluv

    California 1 tier brewing setup with everything you need for 10gal all grain batches

    This is a custom propane setup that I designed myself and had other people help build. It's been used for about 50 brews and creates excellent beer. It includes: * Stainless steel rack with casters, pump mounts, three burner stations, three burners, electric control of burners and pumps...
  5. spoonyluv

    Sold - Brewie 2.0+ available for a dollar

    Hi all, tried using this device and it doesn't suit my needs. I don't feel comfortable selling it because it doesn't deliver on it's promises but could be a decent way to get into all grain. If you want to try one and can pick it up in the bay area, selling it for $1. It works fine and can be...
  6. spoonyluv

    California 5gal corny ball lock kegs

    $50 each (have 5) or best offer, pick up in Alameda, CA 9450x All in used condition but hold pressure and have good o-rings.
  7. spoonyluv

    California NIB adjustable angle weldless brewmometer

    I have a brand new in box, never used, adjustable angle weldless brewmometer that came with my Boilermaker. I use probes so I'm selling. Asking $70 pickup only for now in SF Bay Area (East Bay). Thanks for looking
  8. spoonyluv

    California Keggle for sale fully loaded

    Selling a polished keggle that I've been using as a boil kettle. 4 welded 1/2" MPT fittings: - 3 pc valve+nipple at bottom for liquid out - above valve for thermometer at ~4.5 gal - near top (above thermometer) return/whirlpool port - side with calibrated sight gauge Also includes a custom...
  9. spoonyluv

    California Mash Tun Keggle (fully loaded)

    Selling a polished keggle rigged for mash tun. 4 welded 1/2" MPT fittings: - 3 pc valve+nipple at bottom for liquid out - above valve for thermometer at ~4.5 gal - near top (above thermometer) return/whirlpool port - side with calibrated sight gauge Also includes a custom false bottom...
  10. spoonyluv

    Another keezer build

    Based on Billy Broas's blog. Room for 6-7 kegs, 5 of those on tap. 4 product secondary with the last secondary feeding a 4 port manifold. Two computer fans which run continuously. Johnson A419 temp controller with the probe in a White Labs tube submerged in Vodka. Still trying to figure out...
  11. spoonyluv

    Parts left over from Kegerator/keezer build

    Hi all, Building a keezer. If you have any parts left over from a build, I'll take them off your hands. Specifically looking for: SS shanks (4"), MFL nut and barb (1/4 and 5/16), disconnects (gas and liquid), beer line, gas line and of course Perlick 525SS. I need a few of each for a 5...
  12. spoonyluv

    Black dry erase paint

    Hoping to use some on a keezer build. Anyone know where I can get a small amount? - don't want to spend $150 for 50 sq. ft. Thanks in advance
  13. spoonyluv

    Bypassing electric blanket safety switch

    Hi all, Hoping someone has an idea. I bought an electric blanket hoping to use it as a wrap to keep my Sanke fermenter warm in the garage. This is the model of blanket: http://www.amazon.com/gp/product/B005448ST2/?tag=skimlinks_replacement-20. I'm using a Johnson Controls thermostat to control...
  14. spoonyluv

    All grain equipment

    This stuff has been used for about 20 brew sessions. In good shape and a great starter kit for someone looking to get into all grain. You can have everything for $130 Coolers bought from HomeBrewStuff.com - includes some extra JG fittings and pvc tube Igloo 10 gallon MT cooler with connectors...
  15. spoonyluv

    Upright freezer recommendations

    Hi all, Looking for an upright freezer for fermentation in a Sanke keg and brightening. I'm willing to pay for a new one but having a tough time finding one with adjustable shelves and a flat bottom. My ideal would be one that can fit a Sanke fermenter on the bottom and then a shelf with a...
  16. spoonyluv

    15.5 SS Keggle

    I'm selling a keggle in decent shape. The keggle has some dents since it was a used keg but all of it seems cosmetic. I can provide more pictures if needed. It's got the top cut and 4 welded 1/2" couplers, all half in, half out. Three of the couplers are in a column for outflow/diptube...
  17. spoonyluv

    Refractometer advice

    I'm hoping someone here can help with a suggestion. I'm using a refractometer from BobbyM and I'm finding that the reading for my fermented beer is very different from the reading with my hydrometer (and yes I did use the correction formula). For example, a recent batch reads an FG of 1.010...
  18. spoonyluv

    Thermometer and probe combined

    Does anyone know of a combined thermometer with a gauge and a probe? I think it would be a great addition to a BCS type setup which would allow you a quick visual check of temps without the computer screen.
  19. spoonyluv

    Sight gauge on MLT

    Hi, I'm thinking of putting a sight gauge on my keggle MLT to measure strike water and to make sparging flow control easier. Is this a good idea? If I do go this route, any ideas on a filter or strainer for the fitting (1/2") that will help keep various particles from the sight gauge tube...
  20. spoonyluv

    WTB: Stainless Chiller 50' Coil - 1/2" OD

    Hi all, Since Midwest Supplies has been out of stock on their SS chiller coil for quite a while, I'm looking for another source. If anyone is able/willing to do the work to coil/bend the SS (which can be picked up from nybrewsupply.com, please let me know (PM or reply with price would be fine)...
Back
Top