Search results

digging up this old thread but just got a grandfather connect and want to build an OBVSC (because i can't help myself). I don't want to automate the pump so i will leave that to its own manual switch. Will I need and SSR between the STC and the heating element?

I've been here my whole life, but I'm needing some sanitary tig work done as well... if you find anyone let me know

thank you

Im looking at some options to add some ports to a fermentation vessel... i use it for pressure transfers... never more that 5psi. I was wondering if anyone had any info on if a weldless bulkhead would work in a pressurized vessel.

Excelent... Just ordered a bunch from keg works... I've got a lot of things from keg works but never bungs... Good to know.

would be highly appreciated!

i use the c band shives... all they sell is wood... thanks for the link tho.

I have been getting my cask shives and bungs from NB but it seems everyone stopped selling them... besides UK brewing but they make you order 25 at a time... i just dont need to order that many. Anyone know of a supplier that sells shives and bungs in smaller quantities?

thats what i was thinking... i am just going to do the mash/batch sparge based on the grain bill and add the rest of the water and extract to what i collect for that to get to volume/og. You would think beer smith would have a way to separate the partial mash portion from the total boil volume.

Okay so i am getting ready to brew a partial mash/batch sparge dunkleweizen. The recipe isn't exactly essential to my question so i will skip it. But it will have 6 pounds of grain and 3 pounds of extract. This is going to be a six gallon batch. When i am trying to add this recipe to...

Well I got the correct size orifice from tejas smokers... It works fine if I choke the air inlet down to about only 10%. I was thinking I wouldn't have to do that. Is it because it's high pressure? Sent from my iPhone using Home Brew

Well then they are selling the wrong sizes according to the labels... The orifices they sent me are labeled 3/8 flare x 1/4 inch NPT but must be 1/8 because they surely are not the correct size Sent from my iPhone using Home Brew

Okay so purchased a 10" banjo burner for a homemade stand. Eventually I am going to go all NG but for now I'd like to use the high pressure propane manifold I have. Problem is the threads for the orifice in the burner is 3/8NPT but the high pressure orifices that were supposed to let me set...

thank you all very much!!!

Okay so i am working on an elderberry mead. Started off with four quarts of honey watered up to four gallons. this gave me 4 gallons of mead must with a starting gravity of 1.087. I made a light elderberry syrup that consisted of 2.5 lbs of elderberries 1/2 lb of table sugar 1 cup of water...

im in

im in

Im in

I do the same exact thing, but i found that a racking cane fits perfectly into the end of my picinic tap. It fill the bottle from the bottom. i just fill to the top and when you pull the can out you get the perfect head space

I do the same exact thing, but i found that a racking cane fits perfectly into the end of my picinic tap. It fill the bottle from the bottom. i just fill to the top and when you pull the can out you get the perfect head space