Search results

In Orange County California I'm moving on to electric brewing so I'm selling off my complete all grain system for $2,500 that includes the following; A 15 Gallon Brewers Hardware Kettle with Tangential Inlet and Temperature Port - 15 Gallon Boil Kettle with Tangential Inlet from Brewers...

Now that is a great idea

Ok more pictures so the finalizing of the keezer when we left it, it looked like this Here's me removing the stencil. I thought it would be 3 inch stencils now I'm thinking it should have been 2 inch Another shot of the freshly stenciled keezer Completed! Last night I...

Last weekend I disassembled it to start phase 2 so let’s get an update First off I really scored this time around in the scrap wood department the bulk of the wood purchased for the skin cost me 51 cents a board and all were 45-50 inches which allowed me to cut in half and cover both sides...

Here is my reference image FYI

Next I ran my airline through the hole I drilled and attached the manifold to the collar I also decided to attach my Johnson Controller to the side Time to attach the taps, first I attached the shanks, then the taps, then the handles to help me straighten them out. I decide to...

I'm a hands on learner, so I knew that if I wanted to learn about the draft serving process the best thing to do would be to build one for myself. I finalized the design I found a nice deep freeze one for around $80 off of craigslist it is a not an inexpensive project so...

Slowly but surely my keezer project is starting to get off the ground I have the freezer I just won a new Guinness Stout Facet and keg coupler off of eBay By the end of the month I should have a keg set up (from Eric) at which point I will build a collar for the freezer. Today I...