Search results

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. deprecated

    For Sale Turnkey 3 Vessel (Blichmann) HERMs /Kal (built by Spike) setup - Missouri

    Turnkey electric HERMs setup with a lot of extras. I bought this used from another HBT member with the intent of getting back into brewing but decided to pursue healthier hobbies and couldn't find the time even if I stayed with this hobby. Located in southwest Missouri. Includes: Blichmann 20...
  2. deprecated

    For Sale Missouri - Complete 20G Kal/Blichmann Electric Brewery

    I just bought this setup from member volshersheers a couple of months ago. Long story short, after a close friend of my wife and I encountered serious health issues since then, we've decided to focus on some healthier habits for now, and unfortunately brewing doesn't lend itself to that for me...
  3. deprecated

    Multipurpose HERMs coild/Immersion chiller?

    Would using a coil (stainless or copper) mounted to a lid be able to work as both an HERMs coil and then moved to brew kettle as immersion chiller? If so, pros/cons? Thinking something simlar to this: Lid (with 3" Tri Clamp Port and Cooling Coil) | Stout Tanks & Kettles Brew Equipment
  4. deprecated

    3-Vessel vs Single-Vessel Electric opinions

    For those of you that have gone from one to the other (electric), what are your thoughts on trade-offs? I know it's a fairly open-ended question, but I've been out of the brewing scene for probably 4 years and wonder if people feel like whatever perceived gaps there are between the two have...
  5. deprecated

    Brewery/taproom suggestions near Boca Raton?

    Only here a couple more days but would appreciate any suggestions!
  6. deprecated

    Order delays with stainlessbrewing.com?

    Anyone else experienced recent order delays with stainlessbrewing.com? I placed an order on Feb. 2 and received a "Your Order is Processing" email on Feb. 5. After not hearing any more since Feb. 5 I left a voicemail and sent an email the morning of Feb. 15 and have yet to get a reply.
  7. deprecated

    HERMS control panel?

    Pardon my coffee ignorance. The extent of my knowledge is that it is the second best part of waking up. Is there any way to reasonably use a HERMS brewing control panel for controlling roasting? I don't doubt that it could be MADE to work but curious if anyone has done it in a way that...
  8. deprecated

    Anyone regret DIY AC glycol chiller?

    Wondering if anyone has switched from DIY AC glycol back to a chamber, and if so, why? I've only seen one comment of someone giving up on it and I believe it was due to moisture/sweating lines that possibly could have been resolved with pipe insulation. At the moment the pros seem to outweigh...
  9. deprecated

    Missouri 30G Bottom Drain Electric HERMS (HLT, MLT and BK) - $800

    First things first: This is what little history I have on these kettles. If you choose to buy this you understand the risks of an electric brewing setup and the importance of taking necessary safety precautions. LOCAL PICKUP ONLY! (Springfield, MO). I won't separate it. I think this is a very...
  10. deprecated

    Identify this Perlick?

    Tried searching on variations of the "312" stamped on the bottom but to no avail.
  11. deprecated

    Deprecated's Garage Brewery

    Please bear with me... I'm trying to document my build and glean opinions at the same time. I'll most likely fail at both.:confused: The property my wife and I purchased has a detached garage (ORGINAL GARAGE in image). It also has a well house (WELL HOUSE in image). To further complicate...
  12. deprecated

    Missouri Inline Stainless Filter

    I've been tripping over these ginormous filters for too long now. Hopefully someone can find a use for them! :rockin: Product specs are here. The ports are 1.5" opening with a 2" flange, with an end inlet and a long perforated 1/4" strainer element. I think this makes it either the S10036...
  13. deprecated

    Need help figuring out HERMs MLT temp. issues

    I'm having a terrible time maintaining mash temperatures where I would like them to be. Mashing with PID set to 153, the majority of my mash sits at 145 except for area immediately around HERMs return. My setup (followed Kal's guide): Approx. 32G kettles (19.5" diameter by 26" H) - HLT is...
  14. deprecated

    Went with a large enclosure. Suggestions?

    The local hardware store was selling these. The rubber seal is in good shape and I'm hoping it has a rating of "Waterproof enough.". :) I am looking for some ideas on the front or face of it. Right now I'm guessing it will be easiest for mounting the electronics if I cut out the raised portion...
  15. deprecated

    Nano? Sani-Matic In-line Angle Filter/Strainer

    Ok, this might not generate much interest here but if you don't mind please pass on to any Nano acquaintances you might have. Product specs are here. The ports are 1.5" opening with a 2" flange, with an end inlet and a long perforated 1/4" strainer element. I think this makes it either the...
  16. deprecated

    Price check - Commercial 2' stainless strainer/filter

    I think this is more of a commercial/Probrewer item, but I'm curious as to what might be a fair price. Specs (and crazy retail price) can be found here.
  17. deprecated

    5500w E-Keggle - $75

    Keg with 5500w ULWD element and 6-foot/3-prong dryer plug. Element has been used once. Keg is in very good condition and would be a good candidate for polishing if you want something shiny. Local pickup in Springfield, MO area only, please. I'll get some pictures posted in next day or two.
  18. deprecated

    How would YOU finish "Real Homebrewers...."

    "....shower with a carboy." https://www.homebrewtalk.com/f14/i-got-caught-371498/#post4642835 Thanks for the laugh, maddad! Anyway, what would your "Real Homebrewers..." bumper sticker stay?
  19. deprecated

    DIY Exhaust Hood

    I know it's poor form to link one of your own posts, but I am asking that the post below be moved into this forum. Anyway, a very easy (and relatively cheap) way to build an exhaust hood for your electric brewing setup: https://www.homebrewtalk.com/f51/5-1-2-foot-diy-hood-approx-75-a-371453/
  20. deprecated

    5-1/2 foot DIY Hood for approx. $75

    I'll post some pictures later tonight of my finished hood. Costs are approximate: $32 - FRP $ 5 - Lath screws $12 - 2x4's $14 - Plywood half-sheet $12 - Vinyl J-Channel --- $76 Cut two plywood end caps that are half-circles with a 15.25" radius. This dimension allows the 4' end of the FRP...
Back
Top