Search results

I'm not sure what you're asking for, as all of the information is provided above. You can look up any of the McMaster part numbers and get the exact dimensions of each o-ring. If you're referring to 9396K66 in my photos, it's a 1/16 -019, which is...

My guess is the thermistor in the IC3500 is a 100k Ohm NTC (resistance goes down as the temperature increases) glass encapsulated thermistor, something like this: https://www.digikey.com/product-detail/en/us-sensor-littelfuse-inc/104JG1F/615-1028-ND/1014556. The thermistor in my IC3500 reads...

What program did you use to make that second diagram, that looks pretty slick! I use a relay board in my setup, wound up using a Darlington array to power the 6 SSRs and the relay board. Pretty dead simple to do.

I've had 3 out of 6 in a new build that were bad from the start. The wattage was all over the place on my elements, never getting near the max. I swapped all the wires around to narrow things down, and wound up just ordering 3 new ones. Also Foteks. I read around online and couldn't find...

Here are pictures for the rest.

All the o-rings are in this thread: https://www.homebrewtalk.com/showthread.php?t=206493 I created it a few years ago because I didn't like how he was gouging people on the prices for them (nor would he give the part numbers so we could order them ourselves). Instead of charging $7.88 for a...

Hopefully these pictures will help.

It'd be cool if you could create a smaller temperature display for sensors we're just using for monitoring, so we can keep an eye on things without having them take up the majority of the interface.

Probably a copy/paste thing, but when you move a timer, the "Add New Timer" button changes to "Add New Switch."

Perfect! I think those were all the issues I was having. I'm still waiting for components to arrive, but after a brew day with it I'll be sure to post my build and feedback. Enjoy the, um, keg :).

Awesome, thanks! Looks like it's working as intended now. :mug: You deserve a beer! The only thing I notice odd is when I move something it doesn't stay moved. In the attached picture when I move the 60 minute timer above the 90 minute timer, after I shutdown (or refresh), the 90 minute...

I'm attempting a new install, can someone confirm that I'm on the right path? I am using the new Raspberry Pi 2. I'm running into the same issue as I did earlier with the configuration not properly saving when I exit. Connected HDMI, keyboard, mouse, Ethernet, and a temperature sensor (GPIO...

Thanks, I was looking within the reddit post itself for something! Attached is the hardware I'm experimenting with.

There doesn't appear to be anything there currently, but look forward to it. I'm not overly familiar with Linux, but I'm good at typing in the commands others give! My goal is to set up a system using the new Raspberry Pi. I downloaded Raspbian (NOOBS), extracted it to my MicroSD card...

I'll update my post, thanks. Sorry about that.

Hehehe. What's the edge to edge dimensions of 1 burner? I'm keeping an eye open for something that'll hold my 55 gallon pots (I think they're 24").

I was looking at something like this that would work for natural gas. I figured I'd ask if they're convertible, but they might be a bit out of my range. (No pun intended!)

I've been trying to track down the o-ring sizes for the Blichmann Boilermaker pots and all I found online were other people asking the same question. When I emailed John the response that I (and others) got was that they're sold by various vendors. Not wanting to spend $6.99 a set for my 4...

Me too, I was wondering how to do the same thing!!