Search results

Gents and Ladies, I received a new Wemos D1 mini Pro from the guy I bought the whole set from. Inmediately before desoldering and soldering I tried to flash this Wemos, with a positive result. It was apparently a faulty Wemos causing me problems flashing. After it was in pace on the board, I...

I am having problems with flashing the ispindel,It does nothing after you push the flash button in the Flasher. Can wait for an hour after reading the Log, came to the conclusion it is waiting for something.. The logg shows: Note:Detect serial port changed. Note:Auto MAP serial port.Port-->COM3...

Hi Breebrew, Depending on the answers, I think there was a range in which the sensor worked best, you could always try to ‘drill out weight‘ from the bottom.. Just make one or more holes from the bottom up into the tube and the epoxy, and stop before you go through all the epoxy, in that case...

Thank you for your support, according to this threat I could flash without removing, only need to make sure it is powered off: Do you agree on this? Hereafter I will use the WiFi to update my Wemos and plug off the usb mini part and will only charge via de usb c.

Thank you HarryB, In that case I will still need to reposition the 0 ohm resistor or remove it and place some solder to make a bridge like the green proposed. Do you really foresee problems with the ceramic antenna? Otherwise it is better for me to reorder a Wemos d1 mini and replace it, the...

Thank you. Can anyone tell me if the board is currently in the on or off position (green circle on the first picture)? In that case I won’t need to remove the part before ChrisThomas can confirm it is indeed this part and proceed with charging and flashing the Wemos. Second, I receive a...

Thank you, I read something similar, but wanted to post my specific picture so someone could tell me I am correct (in this case the red component to remove). I don’t want to try out and come to the conclusion it was something else. Si it should be the one circled in red, comming from from the...

Diode removal - Wemos D1 mini pro I bought a set to solder the ispindel yourself from someone containing all parts. I have the cherry phllip 4.0 board and the Wemos d1 mini pro (brand: rainsun), this is where my question is. I want to remove the diode, but it is somewhere else than on the other...