Search results

I don't know exactly how to describe it, its a sharpish bitter taste. Its not astringent like how a tannic red wine will taste, but sharp in a sort of metallic way where the alcohol is very apparent, almost feels over carbed on the the tongue but its not over carbed. The beer is an amber ale...

Looking to brew a malty American IPA with 50/50 bill of 2Row/Munich. I've never tried this much Munich in a recipe so I'm pondering what would work best for the hop additions. I'm thinking it needs a firm bittering backbone...60-70 IBUs but what to finish it with to compliment the maltiness...

You son of a *****, I'm in!

1 in 561 odds? Never tell me the odds! I'm IN!

Awesome, thanks man! this is going to make my life much better :D

haha, sorry, forgot the image

Found a good deal on one of these on Ebay so I bought it and its on it's way. Note how the unit has a barb connector at both ends. With this configuration is it possible to feed it 30-40 psi from the tank into one side, set each individual dial as needed for the 4 kegs and then the output on...

OK, I think I'll take your advice and experiment with this a bit. I think I'll treat my Sabro as my bittering and drop them right at flameout...maybe scale it back to 3/4 oz Let it cool to 175F then drop 3 oz of El Dorado I have an inkling this will be pretty good but we'll see once...

Wow this is awesome dude, thanks so much, I'm a programmer so I'll probably coalsece this into a little app I can use to play around with numbers easily. The only thing I don't see here is what is your temp for the hop stand? Are you assuming a constant temp range or just accounting for dropping...

This is for an 5 gallon NEIPA brew, I haven't done one in almost 2 years but that's what the wife requested :) So I want to try doing one with no boil hops, do all my hops at flameout or thereafter as it cools with the immersion chiller. This will be the first time i've ever omitted boil-time...

That's exactly what I have is the Bev Seal Ultra, thanks! Do the couplings also fit over a barb end, like say the one that feeds into my taps? Or would you need a little piece of tubing to attach that? I believe that Bev Seal Ultra i have for beer lines is also 5/16 OD but the CO2 lines are...

OK so those just pop on and off the lines but they seal fully? Does the line have to be EVABarrier or will it work with any standard sized co2 lines?

What do you guys recommend for this? I don't mean the connection to the keg coupler itself, I have ball lock style connectors already for that. I mean imagine you have a CO2 line that you wanted to cut in half and install a coupler with a male end on one side and a female end on the other that...

I was thinking of doing about 100g total (3.5 oz) but I took your advice and halved it, we'll see how it turns out :)

I used to do this a lot when I was learning, once I had the fundamentals down I would make my brew day a 5 gal batch, but in 5 different 1 gal carboys. I learned a lot from it (quite a bit of what NOT to do .. haha). You just have to have all your ducks in a row so you're ready to go, I'd...

Hey gang, hope you're getting some brewing in during this pandemic. I'm trying Mangrove Jack's California Lager yeast for the first time with a lager that I want to add a punch of citrus to. So the boil will be traditional Saaz/Sterling combo for bitterness but then I want a splash of citrus up...

Arrghhh I got lots of time to brew and I can't find this damn chart I had bookmarked (link is dead). Hopefully someone can lend a hand with something similar. Basically it gave you a breakdown of what kind of utilization you could expect at various temps post-boil...so you could weigh the...

Crap, everytime I go to get back to this I realize i'm missing something....sigh this time I discovered that the JG fittings they included with the swissflow meters do not fit my tubing which is (3/16" ID x 5/16" OD x 1/16 Wall). Do they make a simple barbed fitting that will screw onto those...

Honestly, I don't remember at this point, this is the repo I installed from: https://raw.githubusercontent.com/rtlindne/RaspberryPints/master/arduino/raspberrypints/raspberrypints.ino

Finally getting back to this after waiting for the flow sensors to arrive and being tied up with life. I've got the arduino setup with the raspberrypints.ino sketch, it uploads fine and I get 'alive' printed repeatedly in the serial monitor on my PC so that's all good. But when I wire up a flow...