Search results

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. M

    Foaming pints

    I insulated the 8ft lines then had it run through a beer cooler which cooled the faucet and the beer down then to a 2ft insulated line to the faucet. The keg was at a perfect temperature 38 degrees, I filled around the gaps at the top of the fridge with expandable foam so there wasn't a...
  2. M

    Foaming pints

    Hey jonnyrotten just thought I would show you the perfect pint I pulled out of the worst setup you had ever seen and would never work 🖕🏻🖕🏻🖕🏻🖕🏻🖕🏻 Everyone else Thankyou for the help couldn't of done it without all...
  3. M

    Foaming pints

    Thanks dude appreciate the help and advice
  4. M

    Foaming pints

    I did not do any research I simply took all these components for free and thought I would give it a go and do some research along the way. The fridge is now at 38 degrees the lines have been changed to 3/16 with no connectors in the middle also insulated as well, the regulator is at 8-10psi...
  5. M

    Foaming pints

    Yep I had to cut open the top of the fridge as the fridge was too small. Was also keeping the keg too cold so I thought this would adjust the temp abit as well. I know any other way of keeping the beer line cold it's got to run under the table to the faucet surely?
  6. M

    Foaming pints

    Thankyou guys for the help I realise I have the wrong setup I just thought I could make minor tweaks to get it right. As I say this is all new to me, I was given this setup and told it worked perfectly as a home bar setup I guess not. I will rectify all these wrongs in the following way. I...
  7. M

    Foaming pints

    4
  8. M

    Foaming pints

    3
  9. M

    Foaming pints

    2
  10. M

    Foaming pints

    1
  11. M

    Foaming pints

    Guys you are reading this extract from a lost man, I am at the end of my tether I have put a couple of posts on here the past week I am getting problem after problem with pulling a pint without foam. I thought at first it was because the keg was at room temperature, I bought a fridge and put...
  12. M

    Foaming pints

  13. M

    Wiring help

    I don't know if it'll be a pump probably an electric motor. I bought a keg of Stella Artois and have about 5 different faucets. I could only use two of them as these had one line into them the beer line where as the other had 2 beer lines and a co2 line. My co2 goes straight into the keg...
  14. M

    Wiring help

    I'm clueless with electrics guys but you's are right looks like I need an electricians help. It's getting connected to a 24v ac transformer.
  15. M

    Wiring help

    Nobody know? :confused:
  16. M

    My home bar/brewery

    You've done well to say the least! I don't suppose you know the answer to my predicament. I've made a small bar on a miniture scale in my 10-10 foot shed nothing like yours I wish!! I've got a woodpecker pump and trying to get it wired up so I can get my keg working but I don't know which...
  17. M

    Wiring help

    ��
  18. M

    My home bar/brewery

    That's amazing a lot of time and effort has gone into it by the looks of things!! Is the beer pump working?
  19. M

    Wiring help

    .
  20. M

    Wiring help

    Hi guys I've got a woodpecker cider faucet that needs wired up. I have these 4 wires coming out of it. I'm guessing two will be for the light and two will be for the beer pump but which is which? Thanks in advance.
Back
Top