Search results

Really need to determine what excessive means. Unless you are using an dissolved O2 meter, it is just a guess. "Turn it on and count to..." is the normal recommendation for a hobbyist. The recommendation is .5 to 1 liter per minute once the correct temperature is reached during knockout. I...

:oops:Ugh, so obvious, yet it eluded me. :rock: cheers and thanks

I've tried that numerous times. it shows in kiosk mode, but when I click on bottles, nothing is there. I've attached a couple of pics to show what I am experiencing.

Raspberry Pints is installed and working. one item I can't find, is how to remove the bottles from the display. Can anyone provide assistance? Also, when I do a reboot, it goes straight to the tap list. Is there a way to have it boot up and require me to pull it up manually? Also, when I...

I bought the 30 plate Duda from brew hardware (see attached). From the description: "This is an EXTRA LONG, 30-plate 304 stainless heat exchanger made by Duda Diesel (this is their B3-36A). Actual dimensions, 18.5" long with 3" wide plates. This particular model has 1/2" male NPT ports on both...

I have cleaned close to 40 kegs with mine and it is still going strong. To answer a question from above, I have had stuck on beer at the bottom and this cleaner makes the keg sparkle. I usually run hot PBW for 5 min, followed by a 2-3 minute rinse and 2 min sanitize. Once complete, I put the...

I have used an IC and switched over to a PC last year. I brew all types, never use a screen, whirlpool every time and have never had an issue with clogging. My cleaning consists of running the water, extracted from the PC to cool my wort, one way until clear and then the other way until clear...

So if I just go with the recommended device on the raspberry Pi website, I should be good. Cheers

Does the brand matter? I see a CanaKit and a Vilros within about $10 of each other. The CanaKit received slightly better reviews. This is what I am looking at...

So, I am looking to take the leap to the R Pi world, to display my kegs, and by no means do I know anything about this high tech stuff. I looked over the Rasberry Pints website and looked at the list of things I need to get. Will the following from Amazon be a good start? See link and...

This was a fun project and pulled a lot of the information and design from the pages of this forum. Cheers

Makes sense. I guess the way I build the stand doesn't allow a whole lot of room for the burner to breathe. I guess I need to add some 1/2-1 inch spacers under the kettles to allow for the heat to escape up the sides. A couple of better photos are attached. Cheers

I have a single tier brewstand with 2 BG-14 burners. When lit, if I turn the gas up too high, the propane ignites by the back air holes at the connection. Has anyone seen this issue before and have a solution? I thought a heat shield would stop the problem, but that didn't work. The first...

Anyone know of a bulk grain by in the vicinity of San Diego, CA? Just moved from DC and will definitely miss that one.

Thanks for the info. That addition was a first for me. Cheers

What did you use to make the mounting points for the Chiller plate? I have an 18" duda and was looking to mount it the same way. cheers

If this thing doesn't close out soon, I'm gonna have to bail, so that I can pack up all my junk and transfer out West.

How many bags short are we for closing?

Excellent. Who is the group buy through and is there a price list?

+1 for the gold.