Search results

great build, but the stones???? Noo

you could make some nice thermowells and dip tubes with the scraps at least

My first herms coil was 1/2" copper and it can be bent but is still prone to kinking and pinching. My second coil, ordered precoiled to my specific dimensions from stainlessbrewing.com is also 1/2" but it is very heavy duty stuff. I can't unbend it if I tried. I don't think a hand bender will...

Hello all. I was looking for a sanke to use as a large fermenter. Got my hands on a firkin style cask, with a bung on the side for free, wondering if anyone has fermented in it. Will the bung hold pressure if keg is upright. If it only works sideways i might get a triclover clamp and...

Thanks everyone for their responses. I am still considering using an all stainless hop spider, whirlpooling with one of Jaybirds drill-bit compatible paddles and side pick up tube. Lastly I am considering not filtering and adding everything to the ferm and using cold + time to settle out...

This is the level 3. http://www.norcalbrewingsolutions.com/store/Level-3_15-Inch_FB_Stand.html I have one of his 15" FB for the mash tun that works great, unfortunately it doesn't fit under my 4500w heating element.

This is the level 3. http://www.norcalbrewingsolutions.com/store/Level-3_15-Inch_FB_Stand.html I have one of his 15" FB for the mash tun that works great, unfortunately it doesn't fit under my 4500w heating element.

Just bought a Cereal Killer Mill. Only used it once and love it! Adjustable roller width and can be powered by a drill

I am looking to upgrade my hop filtration system. Right now I use a piece of mesh woven around the pick up tube. The surface area is very small. I vary between whole and pellet hops as availability differs. While chilling my wort i pump it through the HERMS coil in the HLT to cool it. My...

I have this one http://www.homedepot.com/p/Eaton-50-Amp-Spa-Panel-BR-Type-BR50SPA/100206043 I only use it for the GFI, breakers are still in my main power box. Just can't brew on laundry day :) I added a NEMA receptacle on the bottom of panel and made it "in-line" Sorry for late reply

I will be dispensing at a homebrew festival tomorrow. Yes a HOMEBREW FEST!! I borrowed a jockeybox from a club member and would like some advise on serving pressure. It has a stainless steel coil. Not sure the length but it is almost the height of a cooler. I have been force-carbing at...

purchase a spa panel. bought mine from HD with a GFI for $50. rated to 50a too so i can upgrade with it

im having same issue with the paint on my box being scratched up. I plan on adding the adhesive pads you put under chair legs

.

.

Took me a few months to get everything acquired here. Ive made several bathes with it, and have been making continuous upgrades since. Starting from the outlet... I am pulling 30amps from a dryer plug, I re-configured a 50a spa GFI as an inline device, with potential to have 50am in the...

I use a two pump system, and this one being controlled is a 12vdc pump used for HLT circulation and sparge only. Instead of switching the ssr with 5v I bumped it up to 12v 750mA and it is enough to power the pump. thanks for the help everyone

Connected to lamp, lightbulb flashes periodically. Using a floressent bulb, not sure if that helps either. Like I said before was only reading 23v from the pump outlet. I know theres some power, but not the full `120v.

Is there a minimum switching current for SSRs?

Not the best artist, but here is the enclosure, hope my denotions help. Thought i might as well include the front of the box and float switch. My first images on HBT of my herms setup :)