Search results

i prepared ice before to do it "right", but i figure the risk of contamination is pretty low and so far have good results after 6 brew days with this method (my version of brulosophy's short and shoddy). still i wonder if the campden is really doing what i want it to do our not when added to wort.

interesting thought. i've done this a few times and haven't noticed anything bad, but still wonder about the real chemistry taking place.

I'm using the ice made by my refrigerator. it makes just enough to chill to ~90F for a 5G partial boil (then i place it in my fermentation chamber and pitch the next morning)

I use campden to pretreat my water to remove chloromine. Recently I've been doing a partial brew method where I add ice at the end to get to the right volume and chill the beer. If I add campden to the wort at the same time I add the ice will it still remove/breakdown the chloromine? I am...

I've tried doing a full flash with the command line esptool and the ESP8266Flasher GUI tool. Then tried to flash the GravityMon firmware (both 1.2 and 1.3.0B3). None of those seemed to let me get access into GravityMon wifi. Since this was a clean config it also doesn't go into configuration...

yep, that is where I'm at. I've tried flashing with two different programs (one of which I have used before several times). I flashed another d1 mini that I don't have installed on an ispindle and that appeared to flash just fine. Interestingly after I flashed that device it still wanted to...

correct, I'm getting to get into 192.168.4.1 when connected to GravityMon wifi but no luck and the ispindle is right next to my phone and pc

I had gravitymon setup on one device, but through a series of bad choices I've reflashed it and now cannot manage to connect to the "GravityMon" wifi from my pc or phone. I see the network, try to connect with "password" and then usually it fails to connect. Occasionally my pc will stay...

signal is about -85dB when measuring from the device to the router. the picture shows the angle and signal. i assume this is the signal of the router. I'm kind of surprised it's connecting at all. so now I'm looking to use another d1 mini as an extender or modding the antenna ond my ispindles...

#1 has crossed my mind. I'm going to do some measurements to see what turns up. can you change the wifi without resetting the whole device?

i can't figure out why my data recording is missing samples. it is setup to sample every 10mins. i have this going to Ubidots and an influxdb, both show data missing. it started out good, but then missed almost 8 hours before a few more spurious samples.

on the configuration page, the image in Push Settings (2) shows home in the org so i went with text at first.

yep I got it working... Originally I used the text name for the org and bucket name (similiar to what is shown in the documentation), but once I switched to the hex name its working fine

the challenge is probably the main goal, but I'm working to get this and a Craftbeerpi controller both logging into an influxdb. then set up some Grafana displays.

I just came across this and it looks fantastic. I'm going to trying to get this integrated with an influxdb. looks like this should be compatible, but I didn't see much documentation on it. I'll pass in anything I figure out to help.

I have been using an ispindel for ~year and it has worked fine. Then after one brew and re-charge it just gets stuck with a blue light when I turn it on. When I reset it into interface mode I can see the tilt now shows 0.00. From other threads I've read this seems to be the problem, but I...

did you ever save a copy of this recipe? I've tried wayback machine and it didn't save it

I added a second webpage called Pint Log for displaying past beers.

i am running on a windows apache server so my setup isn't quite the same. for me i go to <website>/simplepints/index.php note above, @Digarden had to 'sudo apt-get install php7.3-xml'

what is everyone using for heat resistant wiring? I'll have to temp sensors coming off the gas fired kettle/HLT and I'm worried about the heat coming up and around the pots.