Search results

Check out the new home of Inland Brewers Unite -> http://www.inlandbrewersunite.org cheers!

the new site is http://www.inlandbrewersunite.org

Tweeked it a little bit and this is what I got. Got my starter going now and will be brewing it tomorrow! US Munich 10L Malt 0.50 lb Steeped US Victory Malt 0.50 lb Steeped US Chocolate Malt 0.50 lb Steeped US Caramel 80L Malt 0.50 lb Steeped US Roasted Barley 0.25 lb Steeped...

Hey guys, my first time coming up with my own recipe and decided to try for a black IPA. This is what i have so far: US Victory Malt 0.50 lb Steeped US Chocolate Malt 0.50 lb Steeped US Caramel 80L Malt 0.50 lb Steeped US Black Malt 0.25 lb Steeped Extract - Light Liquid Malt Extract...

I have heard that if you put a little milk in with the water and soak the bottles for a little bit they peel off effortlessly, leaving no goo. I haven't tried this but a guy at my LHBS let me in on the "secret" -Matt

You can't carb at two diff pressures unless you have a double regulator that can be set for 2 different pressures. You could take the other one off the gas. Jack up the psi to 30 on the new one. Shake it for a couple min then hook them both up at 5 or 6psi and it should work.

unfortunately i cant get Yueng up in New England. Ive never seen a slim quarter around otherwise

I wouldnt risk losing a whole batch. It might appear water tight but could be slightly non air tight. Id just go with regular non screw offs. I think it looks nicer too

anyone have any pics of a commercial keg in a sanyo conversion? Thanks!

did you try putting Teflon tape on all the fittings?

what about if you were to prop the quarter keg up on the back step and support it with something underneath. It might be deep enough that way but im not sure where the C02 could go. On top of the keg laying down? Anyone see any issues with that?

Hey Guys, I searched around and didnt really find much but Im sure its been talked about 1000 times. I know a Sanyo 4912 cant fit 1/2 barrels, but i heard of people using 1/4 barrels in it of commercial brew. I was just wondering how it fits in there since its really the same diameter of a 1/2...

Same thing happened to me, ordered a kegging kit. Took a while ship, when i got the box i opened it up and my kegging "kit" consisted of 2 ball locks, a regulator and some hose. I immediately called them up and demanded they over night the forgotten tower, faucets etc (how can you forget the...

How do you guys fit a 1/4 keg in this sanyo? I just measured mine and the depth was like 13 inches. This site:http://www.micromatic.com/beer-questions/sizes-keg-draft-beer-available-aid-11.html it seems it wouldnt be deep enough to fit one... Thanks!

How cold is your keg at? Sometimes if the beer is supercold it will lose some of its great flavor. Try lowering the temperature maybe?? Just a thought.

I had a kit from there and it called for 1 gal of water for 90 min boil. (octoberfest ROM) It came out really thick and syrupy. I hope its not ruined, i tried emailing them about it asking if 1gal is legit on the recipe and they never responded. Recently ordered from AHS and the directions were...

Well after about 48 hrs, i have rapid bubbling in the airlock. GOOD NEWS

The recipe from my LHBS (where the kit is from) Said only a gallon of water. I really hope the batch isnt ruined because of this.

Is a 90 min boil too long for this? Especially in 1 gal of water. Should i expect any issues?

I also thought this was what youre supposed to do, atleast the first time. After that, no oxidation should occur