Search results

Homebrew Talk

Help Support Homebrew Talk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. L

    Replacement firmware for iSpindel (GravityMon)

    Oops, small typo in the web interface home page?: Device Upgrade available 2.0.1 available on github.com Should be 2.1.0, should it not?
  2. L

    Yet another DYI Plato scale

    Firefox 130.0.1 in both Linux and the Android phone. I did see a difference between config backups from the box with 0.96" displays and the freshly installed one with 20x4 displays. Do not know if it makes any difference. 0.96: "http_post_header1": "", "http_post2_header1"...
  3. L

    Yet another DYI Plato scale

    I think I found an issue: After installing from scratch and cloning config from my other spare beta2 -box, I ended up with the same black webpage as before. (This is in Firefox or Vivaldi on a Linux Mint 20.3 laptop). Tried to access the box from my phone (Android/Firefox) - Success! Tried from...
  4. L

    Yet another DYI Plato scale

    Looks normal: 12282 I: Main: Setup completed. 13778 I: WEB : webServer callback /api/status. 17217 I: WEB : webServer callback for /index.html (Memory). 17268 I: WEB : webServer callback for /app.js (Memory). 17283 I: WEB : webServer callback for /app.css (Memory)...
  5. L

    Yet another DYI Plato scale

    beta2 on ESP32s2/ 20x4 LED's: Upping wire speed to 400MHz made a good improvement of the LED's rendering! I still have the same issues with web interface as in beta1. Just turns black in the browser. Sometimes I get a correct view if I use url for one of the submenus. Sometimes the box even...
  6. L

    Replacement firmware for iSpindel (GravityMon)

    I can confirm force gravity is working fine in v2.0.0b3. Excellent work! I normally take out the spindel(s) and clean it/them when primary fermentation is nearly over to get more correct readings the rest of the time. Kveik: Yes, it is a "different league". Need to use two 50W tubular heaters...
  7. L

    Replacement firmware for iSpindel (GravityMon)

    I have just finished a brew using s2mini/ v2.0.0b2. No temp issues with that one, except the "Force Gravity Mode" button still wanted to change status after switching between menus. I'll check out if it is connected to high battery voltage. The oddest thing brewing "Oktoberfest", was the hybrid...
  8. L

    Yet another DYI Plato scale

    Update: I grabbed my old kegmon box with 0.96" displays. This one also has/had v0.8. Updated via web interface to v1.0.0b1. Success!
  9. L

    Yet another DYI Plato scale

    ESP32s2: Upgraded from 0.8 via web interface. The 20x4 LED displays went slooow, like on the first v0.8 Web interface turned black in Firefox - and Vivaldi, on my Linux Mint PC. Tried to flash 1.0.0b1 via esptool.py. Same result. I forgot to try an erease_flash before write_flash. Maybe that...
  10. L

    Replacement firmware for iSpindel (GravityMon)

    Not much really. I'm a little bit unsure about the Home --> "Force Gravity Mode" button behavior: If I tick it to disable sleep mode, enter another menu and return to Home, it is unticked. Have not checked if there's a connection with the battery voltage is higher than 4.15V (= always config mode)
  11. L

    Replacement firmware for iSpindel (GravityMon)

    v2 behaved similar to v1.3 during two weeks of fermentation. I had no issues with it at all running on the s2 mini
  12. L

    Replacement firmware for iSpindel (GravityMon)

    1st "live" test of v2 in a small batch of Belgian Dubbel. One spindel with v2.0.0a4 and one with v1.3.0b3. Let's see how v2 behaves the coming 2 weeks. MQTT push test was working fine in the latest alpha. Great work!
  13. L

    Replacement firmware for iSpindel (GravityMon)

    Have you tried to turn "Force gravity mode" on in the Home menu before touching the device? If your battery voltage is below the level configured, the device will exit config mode when you start moving it
  14. L

    Replacement firmware for iSpindel (GravityMon)

    First impressions: Fantastic work! Question: "Force gravity mode" in the Home screen = enable to avoid sleep mode? Does not seem to work: In Push Targets --> MQTT, I use iSpindel as the pre-defined format to match my former settings vs HA. When I do a "Run push test", I get this error: "No...
  15. L

    Replacement firmware for iSpindel (GravityMon)

    Upgraded from 1.3.0b3 to 2.0.0a1 without issues. The UI is really fast! But the unit has not been in use for a while. Needs a charge
  16. L

    Replacement firmware for iSpindel (GravityMon)

    I'll check it out. The "2.0.0-fwk" branch, right? Will upgrade a spare CherryPhilip 4.0/ s2 mini/ MPU6050
  17. L

    Duotight ball disconnects - experiences?

    I do agree! I just measured the original length with a caliper and adjusted it half a mm as a reference. Then cut off a slice with a wallpaper knife and rubbed with 800grade sandpaper until the tip was 90degrees, flat and according to the new reference length. The pin is nylon'ish. Easy to cut.
  18. L

    Duotight ball disconnects - experiences?

    It is all about stroke length of the center pin. The FC -construction seems to be very tolerance-dependant, e.g. how hard the top and bottom parts are screwed together. I could have achieved the same result by: * Thicker o-ring between bottom and top parts. Not possible, as it is sqeezed...
  19. L

    Duotight ball disconnects - experiences?

    I was curious, and bought a few Duotight FC ball lock disconnects for testing. As others here, I found them to be really tight. It was nearly impossible to get them locked on to some posts. Looks like it depends on how far down the post poppet can be pushed, because connecting the Duotight...
  20. L

    Replacement firmware for iSpindel (GravityMon)

    Oh, forgot to mention, if Service Integrations affects Average Runtime: My SI's are only local. * MQTT to Home Assistant * BrewPi Remix
Back
Top