Search results

EDIT: Okay after tinkering with it for about an hour. I started to dive through all of the Love control settings, apparently I had the c0 = Minimum time between start and stop. I had the setting set with a min time between start and stop set at 30 minutes, so each time I would unplug/plug to...

+1 for the Sump Pump, I use a 400gpm pump and re-circ icewater that I keep in a 60qt coleman cooler. It is a necessity out here in AZ between March/April and September/November. I can get temps from boiling down to 68°F in about 20 minutes or so with my immersion chiller. When the obsession...

No hops? Lightstrike may not be as great of an issue regarding apfelwein. I purchased a case of 12 cobalt blue bottles for my apfelwein, but Ii tend to keep them in a box for bottle carbonation or keg, and refer after.

FWIW, I just dry hopped an IPA tonight. Added a sanitized paint strainer bag full of marbles (also sanitized while in the bag actually :) ) and about 3 oz of leaf Citra into a 5 gallon corny keg while carbing. The bag will stay in there because this keg will be gone fast (birthday party first...

Yes, you screwed up, but that's okay. We learn from our mistakes. Next time use a regular piece of hose for your siphon and pinch it off for each bottle. Far better than pouring! But do not fret, you have beer and as others have stated drink it soon, do not try to age it...at all. Congrats...

I've been brewing for a few years now, and I can remember the first time my 3 piece airlock continually clogged. I simply cracked the lid on my bucket and let it do what it needed too. Having said that, I use a blow off rig every time now (also have switched to 6 gallon carboys), and I also...

Agreed, I I just kegged 5 gallons of an IPA and realized that the blow of rig ran dry, who knows for how long...at least a week... Oxidation? maybe some, hopefully there was a co2 blanket. What I am saying, is that you will still have beer that you made, and it will still be good! Always...

I agree with nettekdl go with the 750ml swing-tops. Beyond being designed to hold an adequate amount of pressure, they are nostalgic, reusable, and make great gifts which the bottle may be returned when the recipient has finished the gift inside. There are some nice 64oz SS wide-mouth...

If you haven't read through this thread, bottle over your dishwasher with the door open, and use your dishwasher as a drying rack for your bottles and bottling gear. Makes clean up simple and your drips and such will end up on the inside of your dishwasher rather than on your floor. I have a...

EDIT: Okay. Apparently, the caps pop right off with a little force... My bad.

Does anyone know how to remove the red plastic bonnet cap on a TapRite regulator? I have one that is stripped and I would like to remove it in order to use it until I receive a replacement part. I have seen the instructions on how to replace the cap, but there aren't any instructions on...

I mainly keg, because bottling is a pain in the ass for the most part, but I do like making labels and such, so I thought I'd give it a whirl! KNOX is effing awesome as an adhesive for labels..pure genius!!!! Thank you!!!

Old post bump... FWIW, it can be argued that cold crashing allows the yeast to rebuild glycogen reserves thereby providing stores for healthy aerobic reproduction phase.

Hi all, Been a while since I have posted. I've been attempting to complete my bachelors degree, and have simply been unable to brew due to the workload this past semester. Regardless, my question(s) is relatively simple (I suppose.) I normally do my research as thoroughly as possible, but...

I have FWH only once before, but the results were good. FWIW, my whirlpool is usually running by the last 15 minutes of the boil, so glamour additions will be a sort of a hop steep for about 20-30 minutes. It is supposed to be in thf tripple digits here tomorrow so chilling will be slow.

I am brewing 10 gallons of IPA this Saturday. I am debating subbing a potion of the Maris Otter for sugar to dry and thin out the beer a bit. I also have never used Honey Malt so i am subbing a portion of the Crystal with it. I do have some Carafa III for color if necessary, but the beer...

I can't live without my Pump-In-A-Box, makes my brewday so much easier. I brew with a single kettle at this time, and not having a way to transfer the water and wort was a PIA to say the least. now I can not only transfer my wort effortlessly, I can whirlpool as well which has cut chilling...

Some of the sickest plumbing and welds I have seen on a brew masterpiece! Keep up the good work! Recently, a new guy started where I work, he speaks 4 languages is going to Harvard for his second Master's Degree, most humble and nicest guy you'd ever meet. To say the least he makes me feel a...

Nice crush, that's what it should look like IMO.

Alright, I kegged the 10g's earlier tonight, and I did not squeeze. I thought it was interesting though....One variety (Belma) which had much larger cones than the Citra returned a lesser volume. Even though both batches were nearly identical, the larger cones seemed to suck more juice out of...