Search results

Homebrew Talk

Help Support Homebrew Talk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. C

    Brew Bubbles: Web-Enabled Airlock

    @LBussy I've had limited exposure to ESP32, what I can say is that the S2 mini, seems a little "odd". Not the double row of pins, but trying to get Arduino or ESPHome to talk nicely took a while to find the right post! I got the S2 mini initially without reading and thought it was going to be...
  2. C

    Brew Bubbles: Web-Enabled Airlock

    Not wishing to highjack this thread, but yes, ESPHome is what I was thinking of. Got a few sensors already running, just might try a change/addition to see if I can get the same data into MQTT...
  3. C

    Brew Bubbles: Web-Enabled Airlock

    @LBussy That won't stop me getting out "a spare" d1mini and seeing what happens if I try and configure a new sensor... Well it will 'till next week, which gives you plenty of time :oops:
  4. C

    Yet another DYI Plato scale

    @mper I'm 6 months into my HomeAssistant journey and your post has just opened out a whole new world of exploration, integration and further "smart homing". Time for some reading and testing :thumbsup:. GravityMon and BrewBubbles integration here we come, but next week unfortunately.
  5. C

    Brew Bubbles: Web-Enabled Airlock

    @LBussy Oooo! I'll have to do a bit of exploration...
  6. C

    Brew Bubbles: Web-Enabled Airlock

    Sorry! Ticket submitted. It's not stopping anything happening, so back burner stuff.
  7. C

    iSpindle - DIY Electronic Hydrometer

    +1 for the OSD PCB and instructions. The eBay link looks like a Cherryphillip PCB which I have made and they've been around a while and also proven. I've built both in the past and in my opinion the OSD are superior in design and buildability. However, if you don't want to order the parts and...
  8. C

    Brew Bubbles: Web-Enabled Airlock

    So there is a small amount of illumination dawning. I can GET from HA to the BB endpoint /IP/bubble/ and I understand, could make it stop working. What I can't get working is the PUSH from BB to HA and am I right that the BB PUSH is always to port 80, as below? The path I set in BB for the...
  9. C

    Brew Bubbles: Web-Enabled Airlock

    Out of my depth here. @LBussy Appreciate your pointers but I need to understand a LOT more about this process before I can go and make it work.
  10. C

    Brew Bubbles: Web-Enabled Airlock

    So, after lots of anti-alcohol. Using RESTer on my laptop and doing a GET to the IP address of BB I get the HTML code. So I'm guessing I need to GET a different port or endpoint? When I telnet to BB I get the following at the timing specicied in the target frequency. So BB is talking, but...
  11. C

    Brew Bubbles: Web-Enabled Airlock

    @LBussy Thanks for the info. I've tried to run before I've learned to crawl here, time to go back to some testing. I've downloaded RESTer extension for Chrome and in between hosting and tasking over the next few days I'll go back to first principles.
  12. C

    Brew Bubbles: Web-Enabled Airlock

    You'll have to excuse any terminology here, I haven't got to grips with it yet. My "task" is get information from BB into HA. So is this a POST from BB AND a GET from HA? Is this just a POST from BB, or just a GET from HA? At this point I'm unclear if HA requests the info from BB or if BB...
  13. C

    Brew Bubbles: Web-Enabled Airlock

    Note to self, please see earlier note to self regarding "technical" activities AFTER alchol consumption. :no:
  14. C

    Brew Bubbles: Web-Enabled Airlock

    Well if YOU don't know.... :no: Yes, Generic HTTP target, but I could never find the full url of what BrewBubbles is supplying in the documentation. The information that HomeAssistant requires about the source of the POST is "http://IP_ADDRESS/ENDPOINT". I guessed several options (I think...
  15. C

    Brew Bubbles: Web-Enabled Airlock

    @LBussy I'm tinkering around with HomeAssistant and was thinking if I could log/use BrewBubbles. So where does the general HHTP POST from BrewBubbles come from? Is there an endpoint after the IP address, i.e. "http://IP_ADDRESS/ENDPOINT"? I've tried a few guesses but not yet been able to get...
  16. C

    Brew Bubbles: Web-Enabled Airlock

    wait, let me go and check...:mischievous:
  17. C

    iSpindle - DIY Electronic Hydrometer

    I can't clearly see from the pictures but it looks like it could be by the reset switch? The component with the "stripe" along one end? Don't know where the crystal (at least I think it's a crystal) has gone? Maybe the crystal is under the can of the ESP12F?
  18. C

    iSpindle - DIY Electronic Hydrometer

    That change over reed switch is what I have already, but consistent switch off is currently eluding me, more testing required. A mercury tilt switch is something I don't have in my components drawer so I might get one, got to be better than regularly replacing the switch...
  19. C

    iSpindle - DIY Electronic Hydrometer

    Seems that most reed switches are normally open, I'm having trouble sourcing a normally closed version. As I said above for some reason the change over reed switches that I already have seem VERY critical on location to operate correctly?
  20. C

    iSpindle - DIY Electronic Hydrometer

    @DuncB If I remember your reed switch is across the reset pins? I was looking to use the reed switch to replace the on/off switch completely. I might persevere with the change over positioning as I can't find a N/C reed switch yet. I've got some other switch alternatives "winging" their way...
Back
Top