Search results

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. wd16261

    Brew Bubbles: Web-Enabled Airlock

    For your information I did not change anything and for me it is still working fine in Brewfather (v. 2.10.5):
  2. wd16261

    YABC-Yet a Brew Controller: BrewManiacEx

    This project looks great and I'm also thinking about changing the controller of my Brew Monk (Hopcat, Klarstein,... equivalent). I have all the parts available even the PCB (Brewcontroller v1.11) but I'm just wondering if someone tried another LCD display? The LCD 20x4 looks a bit oldfashen...
  3. wd16261

    iSpindle Concentrators, Repeaters, Bridges, Hubs

    Did someone already tested this iSpinhub with the D1 mini Pro? I tried it today but I'm getting the messages: 'Début du Loop On a ouvert le Dir' After I configured the Wifi and the reboot. I would like to use a D1 mini Pro so I can use an external antenne.
  4. wd16261

    Fermentrack: Fermentation monitoring & BrewPi-www Replacement for Raspberry Pi

    FYI: My raspberry pi 4B can't use xrdp connection · Issue #2060 · neutrinolabs/xrdp
  5. wd16261

    Fermentrack: Fermentation monitoring & BrewPi-www Replacement for Raspberry Pi

    The brew was canceled so I tried the fresh installation with the latest version Bullseye but this was not a good choose, this version has a problem with xRDP so I'm further away of a proper solution. I'll think I will go back to the previous version Buster which works well but time is what I'm...
  6. wd16261

    Fermentrack: Fermentation monitoring & BrewPi-www Replacement for Raspberry Pi

    Just another question how can I backup the Docker version? With the non-docker version I used a simple script to copy the home folder: #!/bin/bash TIME=`date +%d-%b-%Y` # This Command will read the date. FILENAME=backup-homedir-$TIME.tar.gz SRCDIR=/home DESDIR=/backup/backup tar -cpzf...
  7. wd16261

    Fermentrack: Fermentation monitoring & BrewPi-www Replacement for Raspberry Pi

    I didn't know that there was an uninstall required before the migration. But I have 2 RPI setups and with the first one the migration to the docker version went well without the uninstallation. like you said I will leave it like this for now and when I do have some more time I will reinstall my...
  8. wd16261

    Fermentrack: Fermentation monitoring & BrewPi-www Replacement for Raspberry Pi

    I also have the same error message when I click on (in my case) Fermentrack3 in the menu: I thought that the migration was successfully and when I run some docker commands it looks like the docker version is running? Is there another way to check this? I know that the best solution is...
  9. wd16261

    Kegland Rapt Pill floating hydrometer temperature monitor

    Did you try to replace the battery?
  10. wd16261

    Kegland Rapt Pill floating hydrometer temperature monitor

    I'm a big fan of the iSpindel but because I had one that didn't work properly (charging problems due to the TP4056 that failed) I decided to replace it with the RAPT PILL. I did not encountered any hardware problems with the PILL like mentioned here but I did a firmware update before I used it...
  11. wd16261

    iSpindle Concentrators, Repeaters, Bridges, Hubs

    Did you check with Nautilis? Don't think that this is the right place to ask this question but what is the update interval that you use to send data to BF? This is limited to 900 sec. anything below this will be ignored. Maybe you should use the Custom Stream for the Relay to report to BF?
  12. wd16261

    iSpindle - DIY Electronic Hydrometer

    Yes I knew that but I can be a bit scattered sometimes so I still prefer to avoid the worst anyway.
  13. wd16261

    iSpindle - DIY Electronic Hydrometer

    On my previous build ispindels I always removed the diode on the D1 mini but on the once that I've received recently it looks like the diode is no longer there. Could this be possible or is it on another location that I don't notice? The left one (old version) has a small diode but on the right...
  14. wd16261

    Native ESP8266 BrewPi Firmware - WiFi BrewPi, no Arduino needed!

    Mine were also new but I did order 10 at once so had plenty in reserve
  15. wd16261

    Native ESP8266 BrewPi Firmware - WiFi BrewPi, no Arduino needed!

    I used to have this problem too and first I replaced the 4k7 resistor with a 2K, this already reduced it a lot but eventually I replaced the DS18B20 with a new one and then the problem completely disappeared.
  16. wd16261

    Brew Bubbles: Web-Enabled Airlock

    If it ain't broke don't fix it 😊 Here also still happy with my Brew Bubbles :thumbsup:
  17. wd16261

    Replacement firmware for iSpindel (GravityMon)

    Some extra info. After the firmware was uploaded I received the message that it was completed: I waited 10 sec. but the web page could not be displayed. I tried to upload the firmware a second time and this time I've waited a bit longer, I think more then 30 seconds and then it worked well so...
  18. wd16261

    Replacement firmware for iSpindel (GravityMon)

    I had to do a power Off/On to get it working after the firmware update but it looks very good :thumbsup:
  19. wd16261

    Replacement firmware for iSpindel (GravityMon)

    I am also looking forward to this new release, so as soon as it is available I will definitely test it immediately? But this will probably be in sugar water first. :D
  20. wd16261

    Replacement firmware for iSpindel (GravityMon)

    If you just notice this in your documentation that the limit for the Device name is 12 characters then it is fine for me, but if you want to be compatible with the ispindel firmware then you need to check their limitation I gess?
Back
Top