Search results

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

  1. B

    Stainless Steel Airlock?

    Is anyone aware of any companies that make stainless steel air locks?
  2. B

    Thin wall tubing?

    I ordered 3/16 ID vinyl and tubing and had it delivered yesterday. I failed to see that it was 5/16 OD instead of 7/16. Are there any issues with using the thin wall tubing for my beer/soda lines. All of the homebrew stores I see sell the thick wall tubing exclusively.
  3. B

    Why is my beer flat?

    Applied about 30 PSI to seat the lid, purged, let it sit. I've checked the pressure relief valve and it was still under pressure. Once the valve is closed I can hear the CO2 flowing in.
  4. B

    Why is my beer flat?

    I have a Vienna lager in my keezer right now. It is totally flat. I've had it under pressure for 1.5 months now. I subscribe to the set and forget method. So 1.5 months ago, I set my temperature to 40 degrees and the PSI on my regulator to 14, shooting for just north of 2.5 volumes. After two...
  5. B

    FastRack Party Pack Giveaway! - Open to All Members!

    In Sent from my iPhone using Home Brew
  6. B

    Two heatsticks off one PID?

    I apologize if this has been addressed before, but I couldn't find the answers I was looking for using the search function on the app or using google. So, I am building an e-Herms and I am in the last phase of putting it together. I have two 120v, 2000w heat sticks that I will be using to...
  7. B

    Cost of Secondhand Brewing Equipment

    If you aren't already, use ifttt (if this then that) on the App Store. You can save searches from CL and when something is posted that falls within your custom search, it will automatically e-mail you with a link to the ad. Sent from my iPhone using Home Brew
  8. B

    What gauge electrical cord for element

    Another noob diving in to electric brewing, so forgive my ignorance. Am I correct in assuming that with the below heating element (5500w 240v) that a 10 gauge electrical cord (10 ft at most) will be required and a 30amp dedicated circuit for each element? I have plenty of room for the...
  9. B

    Cheap 240v temperature controller

    Any thoughts on using this to control the water temperature in my HLT using a Camco 5500w ULW heating element for an eHERMS build? http://m.rakuten.com/product/230517930?listingid=213429172&adid=18172 Sent from my iPhone using Home Brew
  10. B

    Allied Precision Bucket Water Heater

    I was thinking of using it (maybe 2 of them) in my HLT for an eherms build with it plugged into a Ranco temperature controller. Sent from my iPhone using Home Brew
  11. B

    Allied Precision Bucket Water Heater

    Does anyone use this for electric brewing instead if a heat stick or weldless heater element? http://www.amazon.com/gp/product/B000BDB4UG/?tag=skimlinks_replacement-20 Sent from my iPhone using Home Brew
  12. B

    Knockout punch

    I am just starting to piece together parts and tools for an electric build. Everything I've looked at makes me think I'll be needing to put a 1 1/4" hole in my pots. Kal recommends the greenlee knockout punches, but would these from harbor freight work as well for a fraction of the cost...
  13. B

    Is it okay to leave starsan in a sealed keg?

    Thanks. Sent from my iPhone using Home Brew
  14. B

    Is it okay to leave starsan in a sealed keg?

    ? Sent from my iPhone using Home Brew
  15. B

    Looking to borrow tool in Seattle area

    Does anyone in the Seattle area have a Greenlee 1 1/4" standard knockout punch that you would be willing to let me borrow for a day or two? I'm trying to convert my HLT and boil kettle to electric using the kit from theelectricbrewery.com Thanks for looking and let me know if you'd be willing...
  16. B

    Guiness is Overated

    Not a big fan of Guinness but then again I'm not a big fan of dry stouts in general. I guess I can appreciate it as an example of the style about the same as I can appreciate BMC as examples of Lite American lagers. Sent from my iPhone using Home Brew
  17. B

    Foam

    What temperature is the keg at? Is the beer line fully contained in the fridge you are using? What kind of tap? How long is your line and is it a 3/16" beer line? Did you replace all o rings prior to use? Did you inspect the liquid out dip tube? If it is cracked at the top that can cause...
  18. B

    Counterflow Wort Chiller (Seattle area)

    My bad. $75. Sent from my iPhone using Home Brew
  19. B

    Plate chiller and/or pump

    Looking for a plate chiller and also a pump. I'm in the north seattle area. Sent from my iPhone using Home Brew
  20. B

    Counterflow Wort Chiller (Seattle area)

    Counterflow wort chiller for sale for beer making. It is made of 30 feet (I think) 3/8" copper tubing inside a red rubber hot water hose. All connections are soldered. I've used this multiple times and it works great, chills the wort to within a few degrees of the tap water. I've used a...
Top