Search results

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

  1. V

    Help with ssr

    I'll switch the contactor and ssr order. That is a good idea. I was just following pjs wiring diagram.
  2. V

    Help with ssr

    I just tested the ssr with a 12v dc input and everything works fine. I'm not getting any output from my pid. Justvran it up and down and no change in output (stays at 0vdc) even when output lit.
  3. V

    Help with ssr

    I justvtested it with a light bulb. Pid output indicated, ssr light lit solid light connected from ssr output to nuetral not lit. If i intermintently connect the light to the ssr outlit the light will blink on when first connected but not stay lit.
  4. V

    Help with ssr

    My red wire goes from the terminal to the input on the ssr. The output from the ssr goes to to the contactor and the output from the contactor goes to the heater element.
  5. V

    Help with ssr

    The pid is mypin ta4.
  6. V

    Help with ssr

    I just swapped the ssr with a spare i had and i get the exact same results.
  7. V

    Help with ssr

    Its almost as if my ssr wont close under load.
  8. V

    Help with ssr

    Here is a photo of my controller
  9. V

    Help with ssr

    This is how i'm wired. Standard 2 phase 5500w setup. If i jumper the red hot around the pid the heater works fine. If i disconnect the heater from the contactor the pid/ssr part of the circuit appears to work fine as i have the ssr light on when the temp is below the pid setpoint and i get...
  10. V

    Help with ssr

    Trying to grt my set up runnung and i cant get my ssr to power up my heating element. It is a 240v 5500 heater throug a contactor and ssr controlledbya pid wired from one of pj's wiring diagrams and I can't figure out what is wrong. Ifi disconnect the heater from the contactoriget the240v phase...
  11. V

    Mid Hudson ValleyY, CT Round#8

    1 pale ale, 1 two row
  12. V

    Mid Hudson ValleyY, CT Round#8

    Ok. Put me in for two
  13. V

    Mid Hudson ValleyY, CT Round#8

    Do you have an estimated delivery date? I want in but I'm away last two weeks of July and beginning of August
  14. V

    2014 Hop rhizome Swap

    Looking to see if there is any interest in doing this this year. Although we are still a few months away from being able to dig up rhizomes here in the north east I figured I'g put this out there to get this started. List what Hop rhizomes you have, what you rhizomes you want (or if you...
  15. V

    Need help finding beer gas in nassau county long island

    Not in Nassau but look for paint ball suppliers. they usually have CO2 and are usually willing to refill your tanks.
  16. V

    Cucumber Wine - My Try (with Pics)

    Tried this summer and it was still strong. Still aging in the carboy. I'll try to get a better update soon.
  17. V

    2013 hops harvest

    .8oz Centennial, .6 oz Hallertauer, 2.7oz Fuggles and 2.3oz Nugget. 6.4oz total - all went into my 2013 Hops Harvest IPA. Total: 1141.79oz.
  18. V

    Show Us Your Label

    Just finished a lable for my AHS Orange Creamsicle Ale
  19. V

    are different hops ready for harvest at different times?

    Most of the the Hallertau cones turned brown way before the Nugget cones were even formed. Maybe not a harvest issue.
  20. V

    are different hops ready for harvest at different times?

    My hallertau look way past the time when i should have picked them, my nugget is no where near ready. Is this normal?
Top