Search results

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

  1. doogie3484

    Sankey to tri-clamp o-ring gasket?

    Ok one other thought you could try sanding one of the Teflon gaskets down to your desired thickness Brewers Hardware 1.5" Tri Clover Gasket PTFE
  2. doogie3484

    Sankey to tri-clamp o-ring gasket?

    Couldn't you just trim the round part off of one side with a razer
  3. doogie3484

    Kegs welded for $45!!

    Let me know how they come back. I am looking for a welder and my parents live in Rochester so that would work great!!
  4. doogie3484

    Larger coupling/valve for Keggle?

    You can just flip the keg over and use a 2" tri clamp valve for a bottom dump on the stem if the keg, if you haven't already cut it that is.
  5. doogie3484

    Bottled my first pumpkin ale yesterday - things I've learned

    I just did an all grain pumpkin and had my first stuck mash. I will deff had rice hulls if you add it to the mash.
  6. doogie3484

    Help designing my RIMS

    Ok so I just needed to look a little longer. Found this on ebay I think this could work, I am just worried aout the amount of pressure it takes to open the valve. It doesn't say on this valve all the others quote a 1 psi crack pressure. Does anyone know if that would be too much for the pump to...
  7. doogie3484

    Help designing my RIMS

    Thats somthing I didn't think about I wonder if I could find some kind of check valve that could work. Triclamp looks like they are way too much money, but I am finding some 1/2" threaded fittings that might work. All the ones I am finding are brass which I'm not crazzy about I'll have to keep...
  8. doogie3484

    Help designing my RIMS

    Ya I was starting to think that if I didn't have enough power to heat the ground water to temp. I could use the hot water from my water heater that already starts at ~130 so I would only have to heat the water an additional 40-50 deg.
  9. doogie3484

    Help designing my RIMS

    No i didn't think of that, but I'm thinking I want to try and put a 5.5kw element in the rims tube so I would be able to have on demand hot water for my sparge. I would like to keep my system rather simple with just 2 kettles and one pump. I think if I just have my water going through the rims...
  10. doogie3484

    Help designing my RIMS

    Hello I am starting to plan and design my new and improved brewery; I have been lurking on this forum for a while now and have yet to see anyone attach the rims to the side of their mash tun. I am thinking about doing tri-clamp rims with a 1 inch tri-clamp ferrules welded to the top of my mash...
  11. MASHTUNV1.0

    MASHTUNV1.0

    MASHTUNV1.0
  12. Breweryplaning

    Breweryplaning

  13. doogie3484

    Official Broken Hydrometer Count

    You just screwed that one you can kiss it goodbye :)
  14. doogie3484

    Official Broken Hydrometer Count

    +1 = 376 I think. It was on my counter drying and I set my caraboy on it for a second I thought the cracking was the caraboy bit then was relieved to see it was my hydrometer
  15. doogie3484

    Post your brew logo

    Here's mine drew it up in cad one slow day
  16. doogie3484

    Official Broken Hydrometer Count

    +1 = 314 first one for me sure it won't be the last
  17. doogie3484

    No more MillerCoors in Minnesota

    Ya I work for a engineering firm in Minneapolis and having all of our state contracts frozen really sucks I can only imagine what it would feel like having a liquor store and having to pull all our beer off the shelves because of the shutdown
  18. doogie3484

    Anyone need a Google+ Invite?

    Thanks for the invite is there a hbt circle that I can join
  19. doogie3484

    Anyone need a Google+ Invite?

    I would love an invite also
Top