Search results

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

  1. D

    Enter the Spike Brewing Kettle Giveaway! is running another awesome giveaway to the homebrewing community. This time, they're giving away this bad boy. A Spike Brewing 10 Gallon Kettle with Ball Valve and Thermometer About the kettle, and Spike Brewing: Spike Brewing has revolutionized the world of brewing with...
  2. D

    Brew Rig - HP Moore Brewing Co

    50 AMP Supply to the brew rig. It was purpose built from the ground up over a 4 year period to be a No Sparge a.k.a. (BIAB) system. 3 batches made so far with each batch better than the previous. 75% efficiency without adding any additional base malts (I just follow) the recipe "as is"...
  3. D

    Brew Rig - 2 Dogs Brewing Co.

    The brew rig sits on a frame designed so that all my vessels are pretty much at the same level. I have camlocks on all my vessels connecting to the single pump. Using a series of 2-way and 3-way valves have created a system that does not require me to switch hoses between vessels in order to...
  4. D

    Brew Rig - Vince "Screwy Brewer" Feminella Brew garage

    For safety reasons I decided to hire an electrician to install a 4 wire 220 volt 30 amp GFCI breaker and run the line to a receptacle near the location of the EBC-SV brew rig controller. The EBC-SV is the heart of the eBIAB system it runs the Chugger pump and regulates the output of the heating...
  5. D

    Brew Rig - Snow Yeti Brewing

    Played around with brewing off and on for 18 years and this brew rig is where I ended up. I grew up in Oregon and developed a love for good beer early in life. I was stationed in Germany and returned to the US stationed in the southern US, prompted me to brew the European beers I missed. Flash...
  6. D

    Brew Rig - Banner's Basement Brewery

    Brew Rig information. HLT-15 Gallon Polar Ware-5500w low density element-Temp/Level Sensor-3 piece ball valveMT-15 Gallon Polar Ware-False Bottom-Temp/Level Sensor-3 piece ball valveBK-15 Gallon Polar Ware-5500w low density element-Hop Basket-Bazooka tube-Temp/Level Sensor-3 piece ball...
  7. D

    Brew Rig - Bad Dog Brewery

    This is my brew rig, It has 3 pid temperature controllers with solenoid valves. There are 1/4" stainless ball valves for extra safety to turn the gas off to the burners when not being used. There are also 3/8 needle valves for controlling the flame. It also has a pilot light system built with...
  8. D

    Brew Rig - Crooked Rooster1 BBL Brew Cart

    Stepped up my game from 5 gallon BIAB to full 1 bbl 3V system. Still dialing it in. Bought 2nd hand from Colorado brewery. Brew for friends and myself now. One day hope to open nano. Boiling Equipment: 45 gallon stainless HLT, MT, Boil Kettle. Has PID and oxygenation system. Fermentation Vessels...
  9. D

    Brew Rig - 3 Vessel 2 Pump 1 Burner Brewery Setup

    Thanks for checking out my brew rig. Please feel free to help out with any suggestions. Here is my process: I fill my BK with the total volume I calculated I will use. I have an icemaker line from my OR tanks with a quick connect and heat the water as the BK is filling. Once I have adjusted the...
  10. D

    Brew Rig - Cowbrau E-BIAB System

    220 volt electric BIAB brew rig using overnight no chill. My brew day is as short and simple as possible with an all grain batch. Using a liquid yeast starter on a stir plate from the wort it will go into the next day, along with pure O2 aeration consistently provides clean exceptionally tasty...
  11. D

    Brew Rig - 61st and Hydraulic Brewing Co

    Trying to brew on a budget has always been a goal of mine. But after 5 years of cutting corners I was looking to upgrade my brew rig, slightly. I built a three tiered gravity feed system on wheels, however after the build I invested in a plate chiller and pump to help with aeration, utilizing...
  12. D

    Brew Rig - Another A-Bomb Brewery

    This brew rig started eons ago as a cooler setup and has just grown exponentially. It's a blast to brew on and I wouldn't give this system up for anything. I made almost all of the components that attach to the kettles and completely wired up the control box. Boiling Equipment: Blichmann...
  13. D

    Brew Rig - Great Breweh

    This is my brew rig I built with 3 burners, propane but will be upgraded to NG with auto burners in future when I get NG in my garage where I brew. Tanks are 50 Liter
  14. D

    Brew Rig - AJ Ruby's 3 vessel 3 tier System with Control Panel

    I just upgraded my brew rig from an electric 5 gallon batch rig (had 10 gallon kettles and a 10 gallon orange Home Depot cooler as a mashtun) to this electric 10 gallon batch rig. I learned a lot from brewing on my 5 gallon rig and added the "I wish I had" to these custom 20 gallon Spike Brewing...
  15. D

    Brew Rig - Omega Brewing EHERMS

    15 Gallon EHERMS system controlled by Kal control panel, has two boil coils, two chugger pumps and quick disconnects attached to silicone tubing. Homemade wood and fiberglass vent hood with 449 CFM Vortex Fan. In-line carbon filter water filter setup. Shirron Plate Chiller. Boiling Equipment...
  16. D

    Brew Rig - Stark Mad 3 Vessel Brewing Setup

    Clone Brew Rig from a popular design. It is 3 vessels with an electric control box and 15 gallon Mega Pots Boiling Equipment: 15 Gallon Mega Pot 2.0 Beer Bottling Gear: Ball Lock Kegs Or Bottles Fermentation Vessels and Equipment: Plastic Buckets, Glass Carboys, and FastRack's Fast Ferment...
  17. D

    Brew Rig - Junction City Brewing

    [/h3] Junction City Brewing system with new RIMS Tube and DIY controller.
  18. D

    Brew Rig - Aces Club Basketball Hoop Brewing Setup

    So, after looking at the simple setup that WortMonger uses for his 3-tier system (i.e., one center steel tube with the kegs bolted to it), I was looking at building one. This is when I noticed the already installed, 9' tall steel tube in my driveway. Is there any reason I couldn't just drill...
  19. D

    Brew Rig - Dexterity Brewing Co

    Modeled off of The Electric Brewery 50A Control Panel for back to back batches. I bought their DIY kit. It's all electric running on 240V and 50A. The stand is made out of unistrut. Boiling Equipment: 15.5 Gallon Sanke Keg, SS Hop Spider Beer Bottling Gear: Ball Lock Kegs and Blichmann Beer Gun...
  20. D

    Brew Rig - Backyard Brewery on Brutus 10 Layout

    Single tier brew rig based on a Brutus 10 layout. I added heavy heat shields, with an air gap,to minimize heat to the stand so the paint wouldn't burn off. I also wanted a control panel that I could "fold" in to save space when stored. I'vecontinued to make small changes along the way, like the...