Search results

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

  1. wd16261

    Replacement firmware for iSpindel (GravityMon)

    Some extra info. After the firmware was uploaded I received the message that it was completed: I waited 10 sec. but the web page could not be displayed. I tried to upload the firmware a second time and this time I've waited a bit longer, I think more then 30 seconds and then it worked well so...
  2. wd16261

    Replacement firmware for iSpindel (GravityMon)

    I had to do a power Off/On to get it working after the firmware update but it looks very good :thumbsup:
  3. wd16261

    Replacement firmware for iSpindel (GravityMon)

    I am also looking forward to this new release, so as soon as it is available I will definitely test it immediately? But this will probably be in sugar water first. :D
  4. wd16261

    Replacement firmware for iSpindel (GravityMon)

    If you just notice this in your documentation that the limit for the Device name is 12 characters then it is fine for me, but if you want to be compatible with the ispindel firmware then you need to check their limitation I gess?
  5. wd16261

    Replacement firmware for iSpindel (GravityMon)

    I tried to add [SG] to the Device name and it looks like the field is limited to 12 characters. So to switch back to SG I had to remove some characters before it was accepted: 12 characters is a bit short not? 🤔
  6. wd16261

    Replacement firmware for iSpindel (GravityMon)

    Thanks you were right I do know that the formula should be in Plato for BF because in all my other ispindels they are in Plato. But I didn't noticed that there is an option in the Gravity settings in GravityMon. So I switched from SG to Plato and it converted the formula also to Plato and now...
  7. wd16261

    Replacement firmware for iSpindel (GravityMon)

    @nzm you are absolutely right and I am not a novice when it comes to ispindels. I have been using them for several years and know very well how to calibrate them. Maybe I did not explain it enough but my test liquid was always at 24°C (so I also know that this will not give the right result in a...
  8. wd16261

    Replacement firmware for iSpindel (GravityMon)

    @mper Ok I did some tests and it seems to work fine and I also tried the calibration methode which also works fine but after entering the calculated formula I have an SG of 1.004 in pure water. I'm still using the version 1.0 so I didn't thought that this version does a temperature correctly or...
  9. wd16261

    Replacement firmware for iSpindel (GravityMon)

    OK Sorry I used Firefox as browser but now it seems to work fine with Google Chrome. I can continue now with the setup. So it was the Gyro probably that was broken? I do need to say that I was no longer using this ispindel because I had my doubts about the readings. That was one of the reasons...
  10. wd16261

    Replacement firmware for iSpindel (GravityMon)

    Sorry but I replaced the Gyro already in the meantime and you could be right that there was a problem with the Gyro because now I geting a step further but not that much. I'm still having the loading ... issue. So I can not save any setting. This is from the serial monitor: 12:25:53.589 ->...
  11. wd16261

    Replacement firmware for iSpindel (GravityMon)

    I do have a spare Gyro so I can try to replace it but then I probably need to remove the batery holder first so I will take some time.
  12. wd16261

    Replacement firmware for iSpindel (GravityMon)

    No this does not work! I tried these advanced settings: And when I click on the save button I get a white page with the message: 'Invalide ID.'
  13. wd16261

    Replacement firmware for iSpindel (GravityMon)

    I have several Jeffery 2.69 iSpindels all with the ispindel firmware v.6.5.1 which are working fine. But I wanted to test GravityMon on one of my ispindels unfortunately I could not get it working. I followed the steps in the documentation and after setting up the Wifi I could connect to the...
  14. wd16261

    iSpindle Concentrators, Repeaters, Bridges, Hubs

    In the beginning I also connected both the ispinhub and ispindel to the my local wifi network but I found out that it was less reliable this way. Sometimes the information of my ispindel was not received by the ispinhub. And my Wifi router was just next to both so I don't think that is was a...
  15. wd16261

    iSpindle Concentrators, Repeaters, Bridges, Hubs

    I have tried Fermwatch but for me it failed. I could not get the BF Authorisation code in correctly although it was correctly entered when I checked the serial monitor! Further I found this to much complicated for what I'm looking for. I just want to see my iSpindel readings on a display that is...
  16. wd16261

    iSpindle Concentrators, Repeaters, Bridges, Hubs

    No that is not the correct one you should not generate an API key but just look under the settings in Brewfather and look for Custom Stream instead: I have hidden my key because if someone uses this key then his information will arrive in my database! So I think it is better to remove your...
  17. wd16261

    iSpindle Concentrators, Repeaters, Bridges, Hubs

    Just configured my iSpindhub to send the information to Brewfather with my Custom Stream API key and it worked! After 15 min my ispindel was visible in the Devices:
  18. wd16261

    iSpindle Concentrators, Repeaters, Bridges, Hubs

    Maybe there is a type error in your API key? Which one did you use? The Custom Stream key or the iSpindel key? It should be the Custom Stream key! (only the characters behind ?id= ) I don't send my data from the iSpundhub to brewfather but I did some test in the past and for me it worked.
  19. wd16261

    iSpindle Concentrators, Repeaters, Bridges, Hubs

    Did you enter your Brewfather key in the iSpindhub settings? 15 min is the minimum Push frequentie! Otherwise it will be rejected by Brewfather.
Top