Search results

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk:

  1. edbees

    Nano Brewmaster

    Anyone hear anything about this? My brother sent me this link: Beer: NanoBrewMaster Home Brew Station Will Be the End of Me Their web site doesn't offer much info either. http://www.nanobrewingtech.com/home.html
  2. edbees

    Keg Connection in Texas

    I did some shopping around when I wanted to get into kegging. I found that Keg Connection had the best prices. They were very helpful on the phone to answer my questions, & I am very happy with my order.
  3. edbees

    Washer drops in the Wort.....Should I dump?

    My goodness no! Never dump a batch unless it's obviously contaminated or tastes like s**t. Even if it tastes "off" give it some time, that usually smooths it out. You'll be fine.
  4. SteamInfusion

    SteamInfusion

    Steam infusion set-up
  5. Pressurecooker

    Pressurecooker

    Pressure cooker on burner
  6. Pressurecooker

    Pressurecooker

    Steam infusion set-up.
  7. SteamInfusionwandinplace

    SteamInfusionwandinplace

    Steam infusion set-up.
  8. Steaminfusionwand

    Steaminfusionwand

    Steam infusion set-up.
  9. Pump-5

    Pump-5

    Stainless Steel pump found at Harbor Freight. 12 VDC, 4500 RPM, 260 GPH @ 50psi. 3/8" NPT female ID & 3/4" male OD threads.
  10. Pump-4

    Pump-4

    Stainless Steel pump found at Harbor Freight. 12 VDC, 4500 RPM, 260 GPH @ 50psi. 3/8" NPT female ID & 3/4" male OD threads.
  11. Pump-3

    Pump-3

    Stainless Steel pump found at Harbor Freight. 12 VDC, 4500 RPM, 260 GPH @ 50psi. 3/8" NPT female ID & 3/4" male OD threads.
  12. Pump-2

    Pump-2

    Stainless Steel pump found at Harbor Freight. 12 VDC, 4500 RPM, 260 GPH @ 50psi. 3/8" NPT female ID & 3/4" male OD threads.
  13. Pump-1

    Pump-1

    Stainless Steel pump found at Harbor Freight. 12 VDC, 4500 RPM, 260 GPH @ 50psi. 3/8" NPT female ID & 3/4" male OD threads.
  14. Rabbit-Hair

    Rabbit-Hair

  15. edbees

    Bob Cannon (Sam Adams) Interview

    Wow, there are actually beard clubs! I wonder what kind of jobs these guys have with some of those more elaborate beards?
  16. edbees

    Bob Cannon (Sam Adams) Interview

    I thought some may find this interesting, an interview with Bab Cannon, brewmaster from Sam Adams. Boston Beer brewery Sam Adams ale microbrews Harpoon - New England.com
  17. edbees

    Carpal Tunnel Surgery

    Well next Friday, I'm going under the knife for right hand Carpal Tunnel surgery, as well as right thumb trigger release (left hand was done two years ago). I will be out on disability for a month. I made sure I had all my beer tasks done before then. I just kegged my Helles Lager and my...
  18. edbees

    Brewery names--what's your story?

    Rabbit Hair Brewery. Well I guess none of you will be drinking my beer.. My wife has 8 rabbits living in our garage, everything I own is covered in rabbit hair :)
  19. edbees

    Possible Cheap Peristaltic Pump for HERMS/RIMS?

    Thanks for the info, I've been looking for a small pump like this! I found this info, it seems it comes with a silicone pumping element already, http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXB887&P=0#tech
  20. edbees

    I Love Whisky, Who else?

    If you like Makers Mark, you might like to try Buffalo Trace. My brother brought me a bottle from TN for my birthday (can't find it here in NY). Also Knob Creek is good.
Top