Search results

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk:

  1. teesherv

    pH solution

    I have envelopes of dried chemicals for pH calibration (nine of each pH4 and pH7) and 8oz (minus a couple of mL) of storage solution. Just bought last month but not gonna use them. Free to whoever wants to pick up. Located in Elk Grove, CA.
  2. teesherv

    California Regulator and 5 pound CO2 tank - Elk Grove, CA

    For Sale - Kegco 2 gauge CO2 regulator, about a year old. I replaced the high pressure regulator when the tank mysteriously fell over in the presence of my teenage boys. CO2 tank holds 5 pounds, has about a pound left. Tank is out of hydro date (10/2014). Some places that exchange don't care...
  3. teesherv

    Taprite Permanent O-ring to CO2 Tank with LeakStopper Oring

    I have a brand new taprite primary reg that has a permanent o-ring, so no nylon washers for me. But, the CO2 tank I swap out also has a permanent o-ring screwed into the male fitting of the tank. So, I would have two rubber o-rings touching to create a seal, doesn't seem the best. Anyone have...
  4. teesherv

    California Electric brew panel (240v, 50a), heat element, and 15 gallon pot

    Electric Brewing Set Up for $240. About 2.5 years old, All you need for eBIAB or finishing a mulit vessel system. - Brew Panel with two 240v, 30 amp locking outlets, Auber boil control (2) and SSRs with heatsink, 1 240v, 15 amp outlet. Plugs into a 14-50 outlet. (electric stove/range 4-prong)...
  5. teesherv

    California Electric Brew Panel (240v) and Hot Rods

    I'm doing the unthinkable - going back to gas for brewing. Electric brewing is hard to do with friends at other houses, so this is a move to be social. Panel runs off 240, built for 50 amps. Does have 120 outlet, uses 4-prog dryer cord for power source So, up for grabs is my brew panel sourced...
  6. teesherv

    Counterflow chiller

    Counterflow chiller from NY Homebrew Supply. Inner tubing is 1/2 inch copper tubing, 25 ft long. Used for about 18 months. Garden hose hook-ups for water, staight "plain" lines for wort. Switching gears, going back to IC. Nothing wrong with chiller. Local pick up south of Sacramento, Ca. $75.
  7. teesherv

    Counterflow Chiller $75 or trade

    Counterflow chiller from NY Homebrew Supply. 1/2 copper tubing, 25 ft long. Used for about 18 months. Garden hose hook-ups for water, staight "plain" lines for wort. Switching gears, going back to IC. Nothing wrong with chiller. Local pick up or you pay shipping from 95624, 15 pounds in a...
  8. teesherv

    Plug large hole in brew pot

    I have a large hole from an electric element in my old aluminum brew pot. I want to pass this pot on to a propane brewer, so I need to fill the hole. To plug smaller bulkheads, it's a simple matter of a 1/2 inch hex bolt, washer, and nut with a silicone washer. For this much larger hole, I am...
  9. teesherv

    California 6 complete quick disconnect fittings

    From BargainFittings (may not fit other brands), 12 stainless individual quick disconnect fittings, 6 male, 6 female. 1/2 inch barb. Flat rate shipping, $30 for all, includes shipping
  10. teesherv

    California Chugger pump

    115v chugger pump, stainless head, wired plug attached. Moving to gravity feed, immersion chiller set up so no longer need this. Mailed usps flat rate. $100, includes shipping. Local pick up in Elk Grove, CA if interested as well.
  11. teesherv

    California Counterflow chiller

    Counterflow chiller from NY Homebrew Supply. 1/2 copper tubing, 25 ft long. Used for about 18 months. Garden hose hook-ups for water, staight "plain" lines for wort. Switching gears, going back to IC. Nothing wrong with chiller. You pay shipping from 95624, 15 pounds in a 16x16x14 inch box...
  12. teesherv

    California 2 weldless hot pods and 1 element

    Two weldless hot pods, come with about 6 feet wire each. Includes pods, wires, locking nuts (two each) and one ripple 5500w element and gasket. Shipping with medium flat-rate box, $45 for all (shipping included in price)
  13. teesherv

    California 60 qt Aluminum Kettle, predrilled

    60 qt Aluminum Kettle, predrilled Two 1/2 inch holes, one 1 inch for electric element. Pics show bulkhead with valve: those will removed and are not part of the sale! Themosensor in other port, will be left. Pot, lid, and one thermosensor only, holes included! Local pick up only, located south...
  14. teesherv

    California 40 qt aluminum pot, with holes

    40 qt aluminum pot, with holes. Two 1/2 inch holes, one 1 inch for electric element. Pics show with thermometer and bulkhead with valve: those will removed and are not part of the sale! Pot and lid only, holes included! Local pick up only, located south of Sacramento, CA. (Elk Grove). $20
  15. teesherv

    California Hot Pod Element Enclosure, Weldless

    Hot Pod Element Enclosure, Weldless style, from brewhardware. Moving to hotrod, don't like holes in kettles. Two of them, with about 6+ feet of cord. Includes enclosure (pod), wire, lock nut, gasket, cord grip, pretty much what you would get when ordering, only used. $30 for both, local pick...
  16. teesherv

    California CounterFlow Chiller

    Counterflow chiller from NY Homebrew Supply. 1/2 copper tubing, 25 ft long. Used for about 18 months. Garden hose hook-ups for water, staight "plain" lines for wort. Switching gears, going back to IC. Nothing wrong with chiller. Since heavy and awkward, local pick up only. Located just south...
  17. teesherv

    California Plastic Fermentors Local Pick Up Only!

    Changing fermentation vessels and size, so these up for grabs. Need a thorough cleaning! Free to first person to pick up. Elk Grove, CA area. Close to Elk Grove High. All yours for the price of free.
  18. teesherv

    California eBrew Parts, including EzBoil

    Upgrading panel, left over parts pulled out of my working system. Free to a good homebrew home :) Le me know what you want!! Seriously, if you can local pick up, great. If you want to pay shipping, that works too. I prefer to cram into a flat rate box. Terminal Strips, 6 rows, covered...
  19. teesherv

    California Auberins EZBoil for trade

    I have an Auberins EZBoil PID, power regulator. I don't want or even like the temp component. In an attempt to simplify my brew panel, I am looking to trade my EZBoil for an Auberins DPSR1. It looks the same, has a dial, but does not have the temp component. So, even swap, just the PIDs...
  20. teesherv

    California Free dented electric brew pot

    Dented up aluminum brew pot, 60 qt King Kooker. Used for electric brewing. Three holes drilled (one for element, two 1/2 in for valves). Lid very dented/warped. Pot itself is ok, dents around bottom. Pretty thin walled. Completely free, no shipping, you pick up. I live in Elk Grove, CA. First...
Top